Onkyo TXNR727 instruction manual Specifications, En-97

Specifications

Amplifier Section

Rated Output Power

All channels: 110 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

125 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(North American)

7 ch × 170 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)

(Others)

Maximum Effective Output Power

7 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

(Asian)

Dynamic Power*

*IEC60268-Short-term maximum output power

250 W (3 Ω, Front)

220 W (4 Ω, Front)

130 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

	0.08% (20 Hz - 20 kHz, half power)
Damping Factor	60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance (Unbalance) 200 mV/47 kΩ (LINE)

2.5mV/47 kΩ (PHONO MM)

Rated RCA Output Level and Impedance

200 mV/2.2 kΩ (LINE OUT)

Maximum RCA Output Level and Impedance 2 V/2.2 kΩ (LINE OUT)

Phono Overload 70 mV (MM 1 kHz 0.5% Direct)

Frequency Response 5 Hz - 100 kHz/+1 dB, –3 dB (Direct

mode)

Tone Control Characteristics

	±10 dB, 30 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	106 dB (LINE, IHF-A)
	80 dB (PHONO MM, IHF-A)
Speaker Impedance	4 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component Y)

0.7Vp-p/75 Ω (Component PB/CB,

PR/CR)

1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, –3 dB

Tuner Section

FM Tuning Frequency Range

87.5MHz - 107.9 MHz (North American and Taiwanese)

87.5MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range

	522/530 kHz - 1611/1710 kHz
Preset Channel	40
Network Section
Ethernet LAN	10BASE-T/100BASE-TX

Wireless LAN

Compatible standards:

	IEEE 802.11 b/g/n standard (Wi-Fi®
	standard)
Security:	WEP 64 bit, WEP 128 bit, WPA/WPA2-
	PSK (AES), WPA/WPA2-PSK (TKIP)
Transmission frequency
	1 - 11 ch (North American and
	Taiwanese)
	10 - 13 ch (France)
	1 - 13 ch (Others)
	(Wi-Fi®standard)
Radio frequency	2.4 GHz

Bluetooth Section

Communication system

Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate)

Maximum communication range

Line of sight approx. 15 m*1

En-97

	Appendix
Frequency band	2.4 GHz band (2.4000 GHz -
	2.4835 GHz)
Modulation method	FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
	A2DP 1.2 (Advanced Audio Distribution
	Profile)
	AVRCP 1.3 (Audio Video Remote
	Control Profile)
Supported Codecs	SBC

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency

44.1 kHz)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.

General

Power Supply	AC 120		V, 60 Hz
	(North American and Taiwanese)
	AC	220	- 240 V, 50/60 Hz (Others)
Power Consumption	6.9	A (North American and Taiwanese)

690 W (Others)

No-sound Power Consumption

80 W (North American and Taiwanese)

75 W (230 V)

80 W (240 V) (Others)

Stand-by Power Consumption

0.1W (North American and Taiwanese)

0.2W (Others)

Dimensions (W × H × D)

	435 mm × 175 mm × 380 mm
	17-1/8" × 6-7/8" × 14-15/16"
Weight	11.2 kg (24.7 lbs.)