Note
•When the setting is set to “On” and the menu is closed, the names of connected
“RIHD On” are displayed on the AV receiver. “Search…” → “(name)” → “RIHD On”
When the AV receiver cannot receive the name of the component, it is displayed as “Player*” or “Recorder*”, etc. (“*” shows up and indicates the number of components, when two or more are received).
•When an
•Set it to “Off” when a connected piece of equipment is not compatible or it is unclear whether the equipment is compatible or not.
•If operation is not normal when set to “On”, change the setting to “Off”.
•Refer to the connected component’s instruction manual for details.
•When the “HDMI CEC (RIHD)” setting is set to “On”, the power consumption on standby mode slightly increases. (Depending on the TV status, the AV receiver will enter standby mode as usual.)
•The pcontrol does not support HDMI OUT SUB. Use HDMI OUT MAIN instead.
•When the source equipment is connected with the u connection, it may malfunction if “HDMI CEC (RIHD)” is set to “On”.
■HDMI Through
`Off
`BD/DVD, CBL/SAT, STB/DVR, GAME, PC, AUX, TV/CD, PHONO:
Selects the input source for which the HDMI Through function is enabled.
`Last:
The HDMI Through function is activated on the input source selected at the time of setting the AV receiver to standby mode.
When enabling the HDMI Through function, regardless of whether the AV receiver is on or in standby, both audio and video streams from an HDMI input will be output to the TV or other components via HDMI connection. The HDMI indicator will be
This setting is fixed to “Auto” automatically when the above “HDMI CEC (RIHD)” setting is set to “On”, resulting in automatic input source selection.
Note
•Only an input source assigned to an HDMI IN via “HDMI Input” setting is enabled (➔ page 58).
•The power consumption in standby mode will increase during the HDMI Through function; however in the following cases, the power consumption can be saved:
–The TV is in standby mode.
–You are watching a TV program.
•Refer to the connected component’s instruction manual for details.
•Depending on the connected component, the correct input source may not be selected with the setting fixed to “Auto”.
•This setting is set to “Off” automatically when the “HDMI CEC (RIHD)” setting is set to “Off”.
•This function is only available for the HDMI OUT MAIN jack.
Advanced Operations
■Audio TV Out (Main)
`Off
`On
This preference determines whether the incoming audio signal is output from HDMI OUT MAIN. You may want to turn this preference on if your TV is connected to HDMI OUT MAIN and you want to listen to the audio from a connected component through your TV’s speakers. Normally, this should be set to “Off”.
Note
•If “On” is selected and the audio can be output from the TV, the AV receiver will output no sound through its speakers. In this case, “TV Speaker” appears on the AV receiver’s display by pressing DISPLAY.
•When “HDMI CEC (RIHD)” is set to “On”, this setting is fixed to “Auto”.
•This setting is fixed to “Off” when “Monitor Out” is set to “Sub” (➔ page 57).
•With some TVs and input signals, no sound may be output even when this setting is set to “On”.
•When “Audio TV Out (Main)” or “HDMI CEC (RIHD)” is set to “On” and you’re listening through your TV’s speakers, turning up the AV receiver’s volume control will make the sound be output from the AV receiver’s front left and right speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.
•Listening mode cannot be changed when this setting is set to “On” and the audio is output from the TV.
•If the audio signal from the player is not supported by the TV, the audio is not output from the TV even if this setting is enabled. When the audio cannot be output from the TV, (When “Monitor Out” is set to “Both”, the audio cannot be output form the TV connected to both HDMI OUT MAIN and HDMI OUT SUB) the audio is output from the speakers connected to the AV receiver.
En-70
Operating procedure (➔ page 56)
