Onkyo TXNR727 En-31, Understanding Icons on the Display, About the Bluetooth Wireless Technology

Understanding Icons on the Display

This section describes icons that appear on the AV receiver’s display during media playback.

Icon	Description
	Folder
	Track
	Playback
	Pause
	Fast Forward
	Fast Reverse
	Artist
	Album
	Repeat One Track
	Repeat Folder (USB Device)
	Repeat
	Shuffle

Playing an Audio from Bluetooth- enabled Device

About the Bluetooth Wireless Technology

Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about 15 meters (49 feet). You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology.

Tip

•The on-screen information appears only on a TV that is connected to HDMI outputs.

•If your Bluetooth-enabled device supports A2DP protocol, its audio file will play through the AV receiver.

•Connection is not guaranteed for all Bluetooth-enabled devices.

Operating on the Remote Controller

The Bluetooth-enabled device can be operated by the supplied remote controller.

Tip

•To operate your Bluetooth-enabled device by the remote controller, the Bluetooth-enabled device must support profile: AVRCP.

•Operation by the remote controller is not guaranteed for all Bluetooth-enabled devices.

Playback

Pairing the AV receiver with a Bluetooth- enabled device

Pairing is an operation where Bluetooth-enabled devices register with each other beforehand. Use the procedure below to pair the AV receiver with your Bluetooth-enabled device. Once a pairing operation is performed, it does not need to be performed again.

1	Place the Bluetooth-enabled device within
	1 meter (3.3 feet) from the AV receiver.
2	Select “BLUETOOTH” in “Input” in Quick
	Setup, and press ENTER (➔ page 52).

BLUETOOTH indicator flashes and the AV receiver is put to pairing mode.

“Now Pairing” appears on the AV receiver’s display.

Tip

•The same operation can be done by pressing BLUETOOTH button on the AV receiver.

•When connecting a Bluetooth-enabled device paired with the AV receiver to the AV receiver, BLUETOOTH input selector is automatically selected.

•If you connect the AV receiver to another Bluetooth- enabled device, hold down BLUETOOTH button until BLUETOOTH indicator flashes or make settings in “Status” of “Bluetooth” for pairing (➔ page 73).

•Some Bluetooth-enabled device may need to re- establish pairing for each connection.

Note

•“BLUETOOTH” cannot be selected, if you’ve selected NET or USB as input selector in Multi Zone.

En-31