Controlling Multi Zone Components
■Operating on the AV receiver
Input selector buttons
ZONE 2 ZONE 3 |
|
|
| MASTER VOLUME | ||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8ON/STANDBY
Tip
•The Whole House Mode function shares the input source of main room with Multi Zone (➔ page 50).
1 To turn on Zone 2/3 and select an input source, press ZONE 2 or ZONE 3 followed by an input selector button within 8 seconds.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on the AV receiver’s display.
To select the same source as the main room’s, press ZONE 2 or ZONE 3 twice. “Z2 Sel: Source” or “Z3 Sel: Source” appears on the AV receiver’s display.
2 To turn off Zone 2/3, press ZONE 2 or ZONE 3 followed by 8ON/STANDBY within 8 seconds.
The zone is turned off.
■Operating on the remote controller
To control Zone 2/3, you must press ZONE2 or ZONE3 on the remote controller first.
8RECEIVER 
| INPUT |
| SELECTOR |
ZONE2 | MUTING |
ZONE3 | VOLq/w |
1 | Press ZONE2 or ZONE3, then point the remote |
| controller at the AV receiver and press |
| 8RECEIVER. |
| Zone 2/3 turns on, the Z2 or Z3 indicator lights on |
| the AV receiver’s display. |
2 | To select an input source for Zone 2/3, press |
| ZONE2 or ZONE3, followed by an INPUT |
| SELECTOR button. |
3 | To turn off Zone 2/3, press ZONE2 or ZONE3, |
| followed by 8RECEIVER. |
The zone is turned off.
Adjusting the Volume for Zone 2
■Operating on the remote controller
1 Press ZONE2.
2 Use VOL q/w.
■Operating on the AV receiver
1 | Press ZONE 2 (the Z2 indicator on the AV |
| receiver’s display flashes). |
2 | Use MASTER VOLUME control within 8 |
| seconds. |
If your Zone 2 speakers are connected to a receiver or integrated amplifier in Zone 2, use its volume control to adjust the volume.
En-75
Advanced Operations
Muting Zone 2
■Operating on the remote controller
1 Press ZONE2 followed by MUTING.
Tip
•To unmute, press ZONE2 followed by MUTING again. Zone can also be unmuted by adjusting the volume.
Note
•Only analog, NET or USB input source is output from the ZONE 2/ZONE 3 LINE OUT jacks and ZONE 2 L/R terminals.
•You cannot select different AM or FM radio stations for your main room and Zone 2/3. The same AM/FM radio station will be heard in each room. Namely, if you have selected an FM station for the main room, that station will also be output in Zone 2/3.
•You cannot select different input selector NET or USB for your main room and Zone 2/3. Namely, if you have selected USB input selector for Zone 2/3, USB input selector will be selected in main room even if NET has been selected for main room.
•BLUETOOTH cannot be selected as input selector in Multi Zone. If you play audio from
•When Zone 2/3 is activated and its input selector is selected, the power consumption of standby mode slightly increases.
•While Zone 2/3 is on, ufunctions will not work.
•When setting the AV receiver to standby mode while Zone 2/3 is active, the Z2 or Z3 indicator is dimly lit.
•Activating Zones in the main room when the listening mode is set to Pure Audio (European, Australian and Asian models) will automatically switch it to Direct.
•“AUX” cannot be selected as input sources for Zone 2/3.
•When “AUX” is the input source of Main room and Zone 2/3 is set to share the same source, no sound will be output from Zone 2/3.
