Onkyo TXNR727 En-16, About RIHD-compatiblecomponents, Connecting to the Network Optional

■MHL (Mobile High-Definition Link)

With its support for MHL (Mobile High-Definition Link), the AUX (Front) input allows you to deliver high- definition video from a connected mobile device.

K

MHL-enabled mobile device, etc.

Connecting to the Network (Optional)

The following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connected to a LAN port on a router, which has a 4-port 100Base-TX switch built-in. Network connection by wireless LAN is possible. See “Performing Wireless LAN Setup” for connections (➔ page 27).

Internet radio

WAN Router

Modem

LAN

Computer or media server

Do not connect the AV receiver’s USB port to a USB port on your computer. Music on your computer cannot be played through the AV receiver in this way.

Connections

p

The AV receiver allows interoperability of the CEC (Consumer Electronics Control) specified in the HDMI standard, which is known as RIHD. Various linked operations can be performed by connecting the AV receiver to an RIHD-compatible TV, player, or recorder.

Default setting is set to off, so it is required to change the setting to on.

Perform this setting after the initial setup.

About RIHD-compatible components

The following components are p-compatible (As of January 2013).

■TV

• Sharp TV

■Players/Recorders

• Onkyo and Integra p-compatible players

• Toshiba players and recorders

• Sharp players and recorders (only when used

The default of the assignment for the input selector buttons and jacks are as shown below. These settings can be changed. (The assignment for the composite video jacks, analog audio jacks, and HDMI Front jack cannot be changed.)

Input selector buttons	HDMI jacks	COMPONENT VIDEO	DIGITAL IN COAXIAL	Composite video and
		jacks	and OPTICAL jacks	analog audio jacks
BD/DVD	HDMI IN 1		DIGITAL IN	VIDEO/AUDIO IN
			COAXIAL 1	BD/DVD
CBL/SAT	HDMI IN 2	COMPONENT VIDEO	DIGITAL IN	VIDEO/AUDIO IN
		IN	COAXIAL 2	CBL/SAT
STB/DVR	HDMI IN 3			VIDEO/AUDIO IN
				STB/DVR
GAME	HDMI IN 4			VIDEO/AUDIO IN
				GAME
PC	HDMI IN 5			AUDIO IN PC
AUX	HDMI Front
TV/CD			DIGITAL IN OPTICAL	AUDIO IN TV/CD
PHONO				AUDIO IN PHONO

En-16

together with Sharp TV)

*Models other than those mentioned above may have some interoperability if compatible with CEC, which is part of the HDMI Standard, but operation cannot be guaranteed.

Note

•For proper linked operations, do not connect more p-compatible components than the quantities specified below, to the HDMI input terminal.

–Blu-ray Disc/DVD players: up to three.

–Blu-ray Disc/DVD recorders/Digital Video Recorders: up to three.

–Cable/Satellite Set-top boxes: up to four.

•Do not connect the AV receiver to another AV receiver/AV amplifier via HDMI.

•Proper linked operations are not guaranteed when more p-compatible components than the above- mentioned quantities are connected.