■Film Mode*2*4
`Video:
“Film Mode” detection is not applied and the input signal is handled as a video source.
`Auto:
Detects whether the input signal is a video or a movie. If it is a movie, the appropriate conversion is applied.
The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture.
■Edge Enhancement*2*4*5
`Off
`Low
`Mid
`High
With this setting, you can make the picture appear sharper.
■Noise Reduction*2*4*5
`Off
`Low
`Mid
`High
With this setting, you can reduce noise appearing on the screen. Select the desired level.
■Brightness*1*2*4
`
With this setting, you can adjust the picture brightness.
■Contrast*1*2*4
`
With this setting, you can adjust contrast.
■Hue*1*2*4
With this setting, you can adjust the color hue between
■Saturation*1*2*4
`
With this setting, you can adjust saturation.
■Color Temperature*2*4
`Warm
`Normal
`Cool
With this setting, you can adjust the color temperature.
Note
•“Picture Adjust” cannot be used when:
–The NET, USB or BLUETOOTH input selector is selected, or
–“Monitor Out” is set to “Sub”.
This procedure can also be performed on the remote controller by using the Quick Setup (➔ page 52).
When the “Picture Mode” setting is set to anything other than “Custom”, this setting cannot be used.
If the “Resolution” setting is set to “4K” (➔ page 57), this setting is fixed at “Off”.
Press CLR if you want to reset to the default value.
If the “Game Mode” setting is set to “On”, this setting is fixed at “Off”.
When a 3D video source is input, “Wide Mode” is fixed to “Full”.
Advanced Operations
Audio Selector
■Audio Selector
`ARC:
The audio signal from your TV tuner can be sent to HDMI OUT MAIN of the AV receiver.*1 With this selection, the TV’s audio can be automatically selected as a priority among other assignments.
`HDMI:
This can be selected when HDMI IN has been assigned as an input source. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) have been assigned, HDMI input is automatically selected as a priority.
`COAXIAL:
This can be selected when COAXIAL IN has been assigned as an input source. If both coaxial and HDMI inputs have been assigned, coaxial input is automatically selected as a priority.
`OPTICAL:
This can be selected when OPTICAL IN has been assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is automatically selected as a priority.
`Analog:
The AV receiver always outputs analog signals. You can set priorities of audio output when there are both digital and analog inputs.
Note
•This setting can be made only for an input source that is assigned to HDMI IN, COAXIAL IN, or OPTICAL IN.
•This setting cannot be used with the NET, USB and BLUETOOTH input selectors.
•When using the Whole House Mode, “Audio Selector” is fixed to “Analog”.
*1 You can select “ARC” if you select the TV/CD input selector. But you cannot if you’ve selected “Off” in the “Audio Return Channel” setting (➔ page 71).
En-67
Operating procedure (➔ page 56)
