SPECIFICATIONS
MODEL |
| POWER 250M |
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts | ||
4Ω Load Mono |
| 125 Watts |
2Ω Load Mono |
| 250 Watts |
| >100dB | |
Crossover Slope |
| 24dB/octave Butterworth |
Crossover Frequency |
| variable from 50Hz to 250Hz |
Dimensions: (with Endbell) |
|
|
Height |
| 2.60" (6.60cm) |
Width |
| 9.8" (24.89cm) |
Length |
| 11.35 (28.83cm) |
Frequency Response |
| 20Hz to 20kHz ±0.5dB |
Bandwidth |
| 10Hz to 200kHz ±3dB |
Damping Factor @ 4Ω (at output connector ) | >200 | |
Slew Rate |
| 30 Volts/ms |
IM Distortion (IHF) |
| <0.05% |
Source Unit Compatibility (+15dB gain overlap) | 17V max. (low level in) | |
Acceptable Signal Voltage Range |
| Variable from 250mV to 6V (RCA) |
Protection | NOMAD - Internal | |
| circuitry limits power in case of overload. Thermal | |
| switch shuts down the amplifier in case of overheating. | |
Battery Fusing Rates (External to Amplifier) |
| 15 amps |
Fuse Type |
| ATC |
Equalization (45Hz Punch Bass) |
| Variable from 0dB to +18dB @ 45Hz |
Input Impedance |
| 20k ohms |
Specifications subject to change without notice
10
