Chapter 2 Avaya P460 CLI Commands

Example:

P460-1#copy tftp SW_imageB c:\imgB.bin 149.49.36.200

Beginning download operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

*********************************************************************

* If you are currently running the P460 Device Manager application, * * it is recommended to exit from it before performing configuration *

* download operations.*

*********************************************************************

default-metric

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the default metric command to set the interface RIP route metric. Use the no default metric command to restore the default value. The default metric is 1.

The syntax for this command is:

[no] default-metric <number>

number

The interface RIP route metric value. The range is 0 to 15.

Example:

Router-1(configure-if:marketing) # default metric 10

Done!

disable interface

User level: read-write, admin.

Use the disable interface command to disables the inband or outband interface.

Avaya P460 Reference Guide

27

Page 37
Image 37
Cambridge SoundWorks P460-1#copy tftp SWimageB c\imgB.bin, Default-metric, No default-metric number, Disable interface