Panasonic BL-VT164 Configure the settings relating to the FTP server FTP, Sender’s E-mail address

14 Configure the settings of the servers [Server]

IMPORTANT

•When entering the host name for “SMTP server address” or “POP server address”, it is necessary to configure the DNS settings on the [Network] tab of the “Network” page. (→page 104)

[Authentication]

•Type

Select the authentication method to send E-mails from the following.

–None: It is not necessary to clear any authentication to send E-mails.

–POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server to send E-mails.

–SMTP: It is necessary to clear the SMTP server authentication to send E-mails.

–Default: None

Note

• When you don’t know the authentication method to send E-mails, refer to the network administrator.

•User name

Enter the user name to access the server.

–Available number of characters: 0 - 32 characters

–Unavailable characters: " & : ; \

•Password

Enter the password to access the server.

–Available number of characters: 0 - 32 characters

–Unavailable characters: " &

[Sender’s E-mail address]

Enter the E-mail address of a sender.

The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails.

•Available number of characters: 3 - 128 characters

•Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and the hyphen (-).

14.2Configure the settings relating to the FTP server [FTP]

Click the [FTP] tab on the “Server” page. (→page 34, page 35)

The settings relating to the FTP server used to transmit the alarm images can be configured on this page.

100

Operating Instructions