2 Monitor images on a cellular phone/mobile terminal
J
Functions
APan/tilt*2
VT164W VT164
BZooming control*2
VT164W VT164
CRefresh
D Resolution control
Outline of functions
Controls the camera direction. The camera will pan or tilt to each direction by pressing the corresponding dial key.
It is possible to perform zooming operations of the camera by pressing “*” or “#”.
Refreshes the camera images by pressing the dial key “5”.
Changes the image capture size by pressing the dial key “0”.
•Image in the aspect ratio of “4:3” Changes the image capture size between 320x240 (default) and 640x480.
• Image in the aspect ratio of | Changes the image capture size |
“16:9” | between 320x180 (default) and |
| 640x360. |
Note
•Some cellular phones cannot change the image capture size even when resolution is changed by resolution control.
E Image quality control
FHome position*2
VT164W VT164
GPreset*2
VT164W VT164
HAUX control*2
VT164W VT164
I Privacy Mode
VT164W VT164
J Disable Privacy Mode
VT164W VT164
It is possible to change the image quality between “Quality1” and “Quality2”. (→page 47)
The camera will move to the home position (→page 55). Home position will be displayed only when home position is set.
The camera will move to the designated preset position to display images by pressing the dial key corresponding to the desired channel. (The dial key numbers are not displayed for Preset No 5 or greater. Only preset IDs will be displayed for them.) (→page 65)
Controls the AUX terminal.
These buttons will be displayed only when “AUX output” is selected for “Terminal 3” on the setup menu. (→page 77)
Select “Privacy Mode” to activate Privacy mode.
Select “Disable Privacy Mode” to return to the normal display.
Operating Instructions
21
