14 Configure the settings of the servers [Server]
IMPORTANT
•Use an NTP server when the more accurate time & date setting is required for the system operation.
[Time adjustment]
Select the time adjustment method from the following. Time adjusted by the selected method will be used as the standard time of the camera.
•Manual: Time set on the “Basic” page will be used as the standard time of the camera.
•Synchronization with NTP server: Time automatically adjusted by synchronizing with the NTP server will be used as the standard time of the camera.
•Default: Manual
[NTP server address setting]
When “Synchronization with NTP server” is selected for “Time adjustment”, select the method of how to obtain the NTP server address from the following.
•Auto: Obtains the NTP server address from the DHCP server.
•Manual: The NTP server address will be entered manually on “NTP server address”.
•Default: Manual
IMPORTANT
•When obtaining the NTP server address from the DHCP server, it is necessary to select “DHCP”, “Auto(AutoIP)”, or “Auto(Advanced)” for “Network Settings” on the [Network] tab of the “Network” page. (→page 104)
[NTP server address]
When “Manual” is selected for “NTP server address setting”, enter the IP address or the host name of the NTP server.
•Available number of characters: 1 - 128 characters
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen
•Default: None (blank)
IMPORTANT
•When entering the host name for “NTP server address”, it is necessary to configure the DNS settings on the [Network] tab of the “Network” page. (→page 104)
[NTP port]
Enter a port number of the NTP server.
•Available port number: 1 - 65535
•Default: 123
102
