Panasonic BL-VP100 Configure the settings of the servers Server, Smtp server address, Smtp port

14 Configure the settings of the servers [Server]

14Configure the settings of the servers [Server]

The settings relating to the E-mail server, the FTP server and the NTP server can be configured on this page. The “Server” page has 3 tabs; the [E-mail] tab, the [FTP] tab and the [NTP] tab.

14.1Configure the settings relating to the E-mail server [E-mail]

Click the [E-mail] tab on the “Server” page. (→page 34, page 35)

The settings relating to the E-mail server used to send the alarm E-mail can be configured on this page.

IMPORTANT

•When a terminal that receives E-mails is not compatible with UTF-8 encode, it is impossible to receive alarm E-mails correctly.

[SMTP server address]

Enter the IP address or the host name of the SMTP server used to send E-mails.

•Available number of characters: 1 - 128 characters

•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-).

[SMTP port]

Enter the port number to which E-mails are sent.

•Available port number: 1-65535

•Default: 25

The following port numbers are unavailable since they are already in use.

20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

[POP server address]

When “POP before SMTP” is selected for “Type”, enter the IP address or the host name of the POP server.

•Available number of characters: 1 - 128 characters

•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-).

Operating Instructions

99