Panasonic BL-VT164W, BL-VP104W FTP server address, Control port, FTP mode, User name, Password

14 Configure the settings of the servers [Server]

[FTP server address]

Enter the IP address or the host name of the FTP server.

•Available number of characters: 1 - 128 characters

•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-).

IMPORTANT

•When entering the host name for “FTP server address”, it is necessary to configure the DNS settings on the [Network] tab of the “Network” page. (→page 104)

[User name]

Enter the user name (login name) to access the FTP server.

•Available number of characters: 1 - 32 characters

•Unavailable characters: " & : ; \

[Password]

Enter the password to access the FTP server.

•Available number of characters: 0 - 32 characters

•Unavailable characters: " &

[Control port]

Enter a control port number to be used for the FTP server.

•Available port number: 1-65535

•Default: 21

The following port numbers are unavailable since they are already in use.

20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

[FTP mode]

Select “Passive” or “Active” for the FTP mode.

Normally, select “Passive”. When it is impossible to connect after select “Passive”, try to connect after selecting “Active”.

•Default: Passive

14.3Configure the settings relating to the NTP server [NTP]

Click the [NTP] tab on the “Server” page. (→page 34, page 35)

The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page.

Operating Instructions

101