Panasonic BL-VP100 Originating port number, Camera action on alarm, •Available range: •Default

11 Configure the alarm settings [Alarm]

[Originating port number]

Select a port number to be used to receive the command alarm.

•Available range: 1-65535

•Default: 8181

The following port numbers are unavailable since they are already in use.

20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000-61000

11.2Configure the settings relating to the camera action on alarm occurrence [Alarm] (BL-VT164W/ BL-VT164)

Click the [Alarm] tab on the “Alarm” page. (→page 34, page 35)

The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 77, 80 and 82 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal.

Camera action on alarm

[Terminal alarm 1]

Select an action to be taken when a terminal alarm 1 is detected from the following.

•Off: Does not take any action even when a terminal alarm 1 is detected.

•1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 1 is detected.

•Default: Off

[Terminal alarm 2]

Select an action to be taken when a terminal alarm 2 is detected from the following.

•Off: Does not take any action even when a terminal alarm 2 is detected.

•1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 2 is detected.

•Default: Off

[Terminal alarm 3]

Select an action to be taken when a terminal alarm 3 is detected from the following.

•Off: Does not take any action even when a terminal alarm 3 is detected.

•1-64:When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 3 is detected.

•Default: Off

Operating Instructions

79