Panasonic BL-VT164W, BL-VP100 Camera title, •Available number of characters: 0 - 20 characters

10 Configure the multi-screen settings [Multi-screen]

–Example when entering an IPv4 address: http://192.168.0.10:8080

–Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080 To access the cameras using the HTTPS protocol, enter as follows:

Example of entry: https://192.168.0.10/

• Available number of characters: 1 - 128 characters

• Default: (Cam. 1) selfcamera, (Cam. 2-16) not registered

IMPORTANT

•When accessing the camera using the HTTPS protocol, install the security certificate of the camera to display images on the monitor. (→page 119)

Note

•When using the host name, it is necessary to configure the DNS settings of the PC to be used for the multi-screen display. Refer to the network administrator for information on the DNS setting of PCs.

•This camera is specified when “selfcamera” is displayed for the IP address or host name.

[Camera title]

Enter the title of the camera. The entered camera title will be displayed on a multi-screen.

•Available number of characters: 0 - 20 characters

•Unavailable characters: " &

•Default:

(Cam. 1) Varies as follows depending on the model in use.

BL-VT164W VT164W / BL-VT164 VT164 / BL-VP104W VP104W / BL-VP104 VP104 / BL-VP101

VP101

(Cam. 2-16) not registered

Note

•When selecting a 16 split-screen, some characters of the camera title to be displayed may not be displayed.

•Even when “16:9” is selected for “Aspect ratio”, the multi-screen is displayed in 4:3.

76

Operating Instructions