Panasonic BL-VP104W, BL-VT164W manual Area, Close button, Display type, Operating Instructions

9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)

Note

•Set the privacy zone larger than the size of an object to be hidden.

•Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.

•When selecting “Zone No” after selecting “Gray” for “Display type”, a mask will be displayed at the center of the image display area and will start blinking while changing its color as follows: Dark gray → Clear → Light gray

•When the other mask that had already been set is on the same zone, the mask that had previously been set will blink as follows: Dark gray → Light gray

[Zoom] buttons, [Brightness] buttons, Control pad/buttons and [Go] button

Refer to page 10 for descriptions of how to operate these buttons/pad.

[Close] button

Click this button to close the “Privacy zone” setup menu.

9.5.6Configure the settings relating to the privacy zone (“Privacy zone” setup menu) (BL-VP104W/BL-VP104/BL-VP101)

Click the [Setup>>] button of “Privacy zone” on the [Image/Privacy] tab of the “Image” page. (→page 57) When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed. Up to 2 privacy zones can be set.

[Area]

The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped. Privacy zones 1 and 2 can be created and they will be numbered in the order of creation.

[Display type]

Select a display type of the privacy zone from the following.

70

Operating Instructions