Manuals / Panasonic / Household Appliance / Home Security System

Panasonic BL-VT164W, BL-VP104W, BL-VP100 manual Recommended network setting for internet

Models: BL-VT164

1 180

Download 180 pages 49.05 Kb

Page 45

Image 45

8 Configure the Internet settings [Internet]

[Recommended network setting for internet]

The recommended settings for connecting to the Internet are performed here.

By clicking the [Set] button, a dialog displaying how the following settings will change is displayed. Click the [OK] button after checking the settings to change the settings to the displayed values.

–[JPEG/H.264] tab on the “Image/Audio” page [H.264(1)]/[H.264(2)]

[Internet mode (over HTTP)]: On

[Transmission priority]: Best effort

–[Network] tab on the “Network” page [Common]

[Max RTP packet size]: Limited(1280byte)

[HTTP max segment size(MSS)]: Limited(1280byte)

Operating Instructions

Page 45

Image 45

Panasonic BL-VT164W, BL-VP104W, BL-VP100 manual Recommended network setting for internet

Contents

BL-VT164WBL-VP104W Network CameraOperating Instructions Model No. BL-VT164Series BL-VP100SeriesAbout notations PrefaceTrademarks and registered trademarks AbbreviationsOperating Instructions Viewer softwareDisplay the setup menu from a PC Table of ContentsConfigure the Internet settings Internet 1 Monitor images on a PCConfigure the multi-screensettings Multi-screen Configure the alarm settings Alarm14 Configure the settings of the servers Server 15 Configuring the network settings NetworkTroubleshooting Using the CD-ROMMaintenance of the camera Maintenance BL-VP104W<Example of IPv4 access> <Example of IPv6 access> 1 Monitor images on a PC1.1 Monitor images from a single camera Password: 4.Enter the user name and the password3.Press the Enter key on the keyboard 1 Monitor images on a PC<Refresh interval of JPEG images> Setup button*1 1.2 About the “Live” page BL-VT164W/BL-VT164select language pull-downmenu Live buttonImage quality buttons VGA QVGA 640x360 320x180 800x600 1280x720AUX buttons*2 Zoom buttons*2Alarm occurrence indication button*2 Preset*2Control pad/buttons*2 Brightness buttons*2 Available range: 0 -Mic input button*3 Snap shot buttonAudio output button*3 Main area*2Operating Instructions select language pull-downmenu Setup button*1Live button Multi-screenbuttonsQVGA 640x360 320x180 Alarm occurrence indication button*21280x720 Image quality buttonsOperating Instructions Main area*21.4 Monitor images from multiple cameras 2.1 Monitor images on a cellular phone → Images from the camera will be displayed A B C D E F G H IOperating Instructions Outline of functions Functions2.2 Monitor images on a mobile terminal → Images from the camera will be displayed Resolution control PresetPan/Tilt AUX controlPreset VT164W VT164 Operating InstructionsPan/Tilt VT164W VT164 Image in the aspect ratio of “16 9” •Image in the aspect ratio of “4:3”AUX control Privacy Mode control VT164W mode can be enabled and disabled with thePress the buttonsZoom display VT164W VT164 3.1 Alarm type 3 Action at an alarm occurrence3.2 Action at an alarm occurrence Notify of alarm occurrences by E-mailOperating Instructions 4 Transmit images onto an FTP server 4 Transmit images onto an FTP server5.1 Equipped security functions 5 About the network security6.1How to display the setup menu 6 Display the setup menu from a PC<Example> 6.2 How to operate the setup menuOperating Instructions 6 Display the setup menu from a PCSetup button 6.3 About the setup menu windowAlarm button Live buttonSetup page Maintenance buttonAdvanced func. button User mng. buttonCamera title 7Configure the basic settings of the camera BasicDate/time •Unavailable characters: &Date/time display format Time display formatSummer time daylight saving NTP/Time zoneIndicator OSD - PositionBrightness status display Alarm status reception port Alarm status update modeAutomatic installation of viewer software Indicator status•Default: English LanguageUPnP Auto port forwarding 8 Configure the Internet settings InternetDDNS •Default: OffRecommended network setting for internet • Default: 16:9 VT164W Aspect ratioLive page Initial display JPEGRefresh interval JPEG Image capture sizeImage quality Image quality setting• Default: 640x360 VT164W Default Quality1Operating Instructions Operating Instructions H.264 transmission H.2641/H.2642Internet mode over HTTP •Default: OnFrame rate Transmission priorityMax bit rate per client •Default: 30fpsTransmission type Refresh intervalUnicast port1Image*2 Unicast port2Audio*2Multicast TTL/HOPLimit*3 •Available value: •Default:•Default: Off Self return Home positionSelf return time Image holdAbout extra zoom Extra zoomDigital zoom Pan-Tiltdegree/Zoom ratio displayPreset position VT164W Image adjustExtra zoom VP104W VP104 Operating InstructionsOperating Instructions Privacy zone•Default: Off Adaptive black stretchMask area Back light compensation BLCLight control mode •Default: OffDay & Nightelectrical Auto slow shutterWhite balance Red gainBlue gain 9.5.2 Set mask areasChroma gain level Aperture levelPage 3.Click the divided areas to be masked A. Image in the aspect ratio of “16 9” 9.5.3.1 Register the preset positions Preset ID 0-9,A-Z Preset IDPosition No •Default: OffSet button Delete buttonClose button Privacy zone Zone settingDisplay type Zone selectClose button AreaDisplay type Operating Instructions•Default: Off Close buttonOperating Instructions Audio transmission/reception Audio encoding format•Default: G.726 Audio output volume PC to Camera Mic input volume Camera to PCAudio bit rate Mic input interval Camera to PCPermission level of audio trans./recep Audio output port PC to CameraMuting while panning/tilting •Default:10Configure the multi-screensettings Multi-screen IP addressExample of entry •Unavailable characters: & •Default Camera title•Available number of characters: 0 - 20 characters Alarm 11 Configure the alarm settings AlarmTerminal 1 VT164W Terminal 2 VT164WCommand alarm VMD alarmTerminal 3 VT164W Body heat sensor VT164W VT164Originating port number Camera action on alarm•Available range: •Default: Terminal alarm•Default: Off Command alarm •Default: Off VMD alarm•Default: Off Body heat sensorAlarm image FTP transmission Alarm imagePost alarm FTP >>Image compression rate upon alarm detection Alarm output terminal setupImage quality upon alarm detection Alarm output triggerAUX title 11.5Change the AUX name Alarm BL-VT164W/ BL-VT164Pulse width AUX Up to 10 characters11.6 Configure the VMD settings VMD area VMD area setting BL-VT164W/BL-VT164Select a preset position VMD information addition Procedure for setting the VMD areaInformation addition All areas button VT164WDetection area StatusDetection sensitivity Light detection controlE-mailserver E-mailnotificationDestination of notification Alarm image attachmentE-mailnotification Address 1 - AddressPanasonic alarm protocol Panasonic alarm protocol notificationAdditional alarm area dataVMD Destination portDestination of notification •Available range: •Default:Address 1 - Address Operating InstructionsXML notification XML notificationPassword Destination setting for XML notificationNotification data Notification intervalFace detection Face detection•Default: Off XML notificationAuthentication User auth•Default: On Access level Password Retype passwordUser check User nameHost check Host authAccess level •Default: OffActivation Priority streamDestination IP address1 Destination IP address2When “16:9” is selected for “Aspect ratio” When “4:3” is selected for “Aspect ratio”• Default: 640x360 VT164W Image capture sizeSMTP server address 14Configure the settings of the servers ServerSMTP port POP server addressAuthentication Sender’s E-mailaddress–Default: None –Unavailable characters: & : ; \ •PasswordControl port FTP server addressFTP mode PasswordNTP server address setting Time adjustmentNTP server address NTP portTime adjustment interval Time zone•Default: 1h 15.1 Configure the network settings Network 15 Configuring the network settings NetworkIPv4 network Network SettingsIPv6 network Default gatewayIP addressIPv4 Subnet maskDHCPv6 CommonHTTP port Line speedHTTPS UPnPAuto port forwarding Camera short cutCRT key generate CA Certificate - CA Certificate installSelf-signedCertificate - Generate Self-signedCertificate - InformationEasy IP Setup accommodate period FTP access to cameraBandwidth controlbit rate When using the self-signedcertificateInternet WAN 15.2 Configure the HTTPS settings 1.Click the Execute button of “CRT key generate” Available number of characters DescriptionDescription ItemAvailable number of characters IndicationItem –Register the camera for Trusted SitesDescription Available number of charactersItem 15.2.4 Installation of the server certificateDescription Available number of characters•Available port number: 1 - •Default: 15.2.5 Configuration of the connection protocol•When using the self-signedcertificate •When using the server certificate15.3.1Install the security certificate 15.3 Access the camera using the HTTPS protocol1.Access the camera using the HTTPS protocol Operating Instructions 15 Configuring the network settings Network4.Click “Install Certificate...” 15 Configuring the network settings NetworkOperating Instructions Operating Instructions 15 Configuring the network settings Network 8.Click “Next”Operating Instructions 15 Configuring the network settings Network 9.Click “Finish” 10.Click “Yes”Operating Instructions 11.Click “OK” 3.Click “Install Certificate...” 15 Configuring the network settings NetworkOperating Instructions 15 Configuring the network settings Network 5.Click “Finish”Operating Instructions 15.4Configure the settings relating to DDNS DDNS About DDNS services IPv4/IPv6•About Dynamic DNS Update RFC2136 compliant C A D C BB D A E E •DDNS service such as “Viewnetcam.com”Global address is changed PersonalCamera URL 15.4.2 When using the “Viewnetcam.com” serviceYour Account Link Access using the current global address•Default: 1h Access intervalHost name 15.4.5 When using “Dynamic DNS Update”Access interval •Default: 24h15.4.6 When using “Dynamic DNS UpdateDHCP” 15.5Configure the settings relating to SNMP SNMPCommunity System nameLocation FTP periodic image transmissionContact FTP >>Transmission interval FTP periodic image transmission•Default: Off Default 1sOperating Instructions 15.7.1 How to set the schedulesOperating Instructions 15.7.2 How to delete the set scheduleOperating Instructions →page SSID Communication mode•Default: wifi Encryption method WEP methodWEP key •10 hex characters: 64bit5 alphanumeric characters 64bit Network key•13 alphanumeric characters: 128bit •8 to 63 alphanumeric charactersOperating Instructions About Wi-FiProtected Setup WPS→The wireless settings are updated Using a selected PIN code set to the camera Available number of characters 8 characters• Available characters: Numbers 2.Configure Wi-FiProtected Setup WPS • Available number of characters: 8 characters• Available characters: Numbers Wireless QoS 16.3 Using the cameras Wireless QoS BasicChecking wireless settings for the camera •Default: UseFirmware version Wireless Wireless module statusAuto setup WPS Mac address of the wireless moduleBSSID Authentication methodRadio wave status Encryption methodperiod of the schedule Operating Instructions Body heat sensor permission VT164W 18.2 Upgrade the firmware Upgrade 18 Maintenance of the camera Maintenance18.1 Check the system log System log Time & dateInformation of each item will be displayed 18.3 Check the status Status UPnP Viewnetcam.comSelf check Operating InstructionsLoad the default HTML files setup menu Reset to the default Except the network settingsReboot Operating Instructions19 Privacy Mode BL-VT164W/BL-VT164 19.3 Turning the Privacy Mode off 20.1 About the CD launcher 20 Using the CD-ROMA B C D 20.2 Installing Panasonic “IP Setting Software”20.4 Installing the Viewer software 20.3 Installing the manualsFor Windows XP For Windows Vista/WindowsOperating Instructions Operating Instructions Error indications relating to FTP Error indications relating to SMTP21 About the displayed system log CategoryError indications relating to Dynamic DNS Update Error indications relating to “Viewnetcam.com”Category IndicationLog indications relating to login Error indications relating to NTPLog indications relating to HTTPS CategoryCategory Panasonic alarm protocol notification errorIndication DescriptionSymptom 22 TroubleshootingCause/solution Reference pagesCause/solution SymptomWhen communicating using IPv4 Reference pagesAuthentication window is displayed repeatedly SymptomCause/solution Reference pagesCannot access the camera from a mobile terminal SymptomCause/solution Reference pagesCause/solution SymptomWhen using Internet Explorer Reference pagesCause/solution SymptomThe movement of the camera automatically changes Reference pagesCause/solution SymptomH.264 images are not displayed Reference pagesCannot connect to the wireless router SymptomCause/solution Reference pagesWhen using Internet Explorer Information BarSymptom Cause/solutionCause/solution SymptomImages are not fit in the frames Reference pagesPanasonic Canada Inc For U.S. and CanadaFor Europe and other countries PGQP1208YA C0312-1042