Manuals / Panasonic / Household Appliance / Home Security System

Panasonic BL-VT164W, BL-VP104W, BL-VP100 manual Click the divided areas to be masked

Models: BL-VT164

1 180

Download 180 pages 49.05 Kb

Page 64

3.Click the divided areas to be masked.

9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)

Note

VP101 :

•“Mask area” can be set only when “4:3” is selected for “Aspect ratio”. If the “Aspect ratio” is changed to “16:9” after setting the mask area, the setting of the mask area is maintained.

3.Click the divided areas to be masked.

→The clicked areas will be masked and will become white. To cancel masking, click the area again.

4.Click the [End] button after completing masking areas.

→	VT164W	VT164	: The borders on the image displayed on the [Image/Position] tab will disappear.
→	VP104W	VP104	VP101	: The borders on the image displayed on the [Image/Privacy] tab will

disappear.

IMPORTANT

VT164W	VT164	VP104W	VP104	:
				:

•When “4:3” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from the image of “16:9”. Therefore even when “4:3” is set, the brightness of the masked area will affect the image. It is recommended that the aspect ratio should be once set to “16:9” before masking.

64

Operating Instructions

Image 64

Panasonic BL-VT164W, BL-VP104W, BL-VP100 manual Click the divided areas to be masked

Contents

Network Camera BL-VT164WBL-VP104WOperating Instructions Model No. BL-VT164Series BL-VP100SeriesPreface About notationsTrademarks and registered trademarks AbbreviationsViewer software Operating InstructionsTable of Contents Display the setup menu from a PCConfigure the Internet settings Internet 1 Monitor images on a PCConfigure the alarm settings Alarm Configure the multi-screensettings Multi-screen14 Configure the settings of the servers Server 15 Configuring the network settings NetworkUsing the CD-ROM TroubleshootingMaintenance of the camera Maintenance BL-VP104W1 Monitor images on a PC <Example of IPv4 access> <Example of IPv6 access>1.1 Monitor images from a single camera 4.Enter the user name and the password Password:3.Press the Enter key on the keyboard 1 Monitor images on a PC<Refresh interval of JPEG images> 1.2 About the “Live” page BL-VT164W/BL-VT164 Setup button*1select language pull-downmenu Live buttonVGA QVGA 640x360 320x180 800x600 1280x720 Image quality buttonsAUX buttons*2 Zoom buttons*2Preset*2 Alarm occurrence indication button*2Control pad/buttons*2 Brightness buttons*2 Available range: 0 -Snap shot button Mic input button*3Audio output button*3 Main area*2Operating Instructions Setup button*1 select language pull-downmenuLive button Multi-screenbuttonsAlarm occurrence indication button*2 QVGA 640x360 320x1801280x720 Image quality buttonsMain area*2 Operating Instructions1.4 Monitor images from multiple cameras 2.1 Monitor images on a cellular phone A B C D E F G H I → Images from the camera will be displayedOperating Instructions Functions Outline of functions2.2 Monitor images on a mobile terminal → Images from the camera will be displayed Preset Resolution controlPan/Tilt AUX controlOperating Instructions Preset VT164W VT164Pan/Tilt VT164W VT164 •Image in the aspect ratio of “4:3” Image in the aspect ratio of “16 9”AUX control mode can be enabled and disabled with the Privacy Mode control VT164WPress the buttonsZoom display VT164W VT164 3 Action at an alarm occurrence 3.1 Alarm type3.2 Action at an alarm occurrence Notify of alarm occurrences by E-mailOperating Instructions 4 Transmit images onto an FTP server 4 Transmit images onto an FTP server5 About the network security 5.1 Equipped security functions6 Display the setup menu from a PC 6.1How to display the setup menu6.2 How to operate the setup menu <Example>6 Display the setup menu from a PC Operating Instructions6.3 About the setup menu window Setup buttonAlarm button Live buttonMaintenance button Setup pageAdvanced func. button User mng. button7Configure the basic settings of the camera Basic Camera titleDate/time •Unavailable characters: &Time display format Date/time display formatSummer time daylight saving NTP/Time zoneOSD - Position IndicatorBrightness status display Alarm status update mode Alarm status reception portAutomatic installation of viewer software Indicator statusLanguage •Default: English8 Configure the Internet settings Internet UPnP Auto port forwardingDDNS •Default: OffRecommended network setting for internet Aspect ratio • Default: 16:9 VT164WJPEG Live page Initial displayRefresh interval JPEG Image capture sizeImage quality setting Image quality• Default: 640x360 VT164W Default Quality1Operating Instructions Operating Instructions H.2641/H.2642 H.264 transmissionInternet mode over HTTP •Default: OnTransmission priority Frame rateMax bit rate per client •Default: 30fpsRefresh interval Transmission typeUnicast port1Image*2 Unicast port2Audio*2•Available value: •Default: Multicast TTL/HOPLimit*3•Default: Off Home position Self returnSelf return time Image holdExtra zoom About extra zoomDigital zoom Pan-Tiltdegree/Zoom ratio displayImage adjust Preset position VT164WExtra zoom VP104W VP104 Operating InstructionsPrivacy zone Operating InstructionsAdaptive black stretch •Default: OffBack light compensation BLC Mask areaLight control mode •Default: OffAuto slow shutter Day & NightelectricalWhite balance Red gain9.5.2 Set mask areas Blue gainChroma gain level Aperture levelPage 3.Click the divided areas to be masked A. Image in the aspect ratio of “16 9” 9.5.3.1 Register the preset positions Preset ID Preset ID 0-9,A-ZPosition No •Default: OffDelete button Set buttonClose button Zone setting Privacy zoneDisplay type Zone selectArea Close buttonDisplay type Operating InstructionsClose button •Default: OffOperating Instructions Audio encoding format Audio transmission/reception•Default: G.726 Mic input volume Camera to PC Audio output volume PC to CameraAudio bit rate Mic input interval Camera to PCAudio output port PC to Camera Permission level of audio trans./recepMuting while panning/tilting •Default:IP address 10Configure the multi-screensettings Multi-screenExample of entry Camera title •Unavailable characters: & •Default•Available number of characters: 0 - 20 characters 11 Configure the alarm settings Alarm AlarmTerminal 1 VT164W Terminal 2 VT164WVMD alarm Command alarmTerminal 3 VT164W Body heat sensor VT164W VT164Camera action on alarm Originating port number•Available range: •Default: Terminal alarm•Default: Off VMD alarm •Default: Off Command alarm•Default: Off Body heat sensorAlarm image Alarm image FTP transmissionPost alarm FTP >>Alarm output terminal setup Image compression rate upon alarm detectionImage quality upon alarm detection Alarm output trigger11.5Change the AUX name Alarm BL-VT164W/ BL-VT164 AUX titlePulse width AUX Up to 10 charactersVMD area setting BL-VT164W/BL-VT164 11.6 Configure the VMD settings VMD areaSelect a preset position Procedure for setting the VMD area VMD information additionInformation addition All areas button VT164WStatus Detection areaDetection sensitivity Light detection controlE-mailnotification E-mailserverAlarm image attachment Destination of notificationE-mailnotification Address 1 - AddressPanasonic alarm protocol notification Panasonic alarm protocolAdditional alarm area dataVMD Destination port•Available range: •Default: Destination of notificationAddress 1 - Address Operating InstructionsXML notification XML notificationDestination setting for XML notification PasswordNotification data Notification intervalFace detection Face detection•Default: Off XML notificationUser auth Authentication•Default: On Password Retype password Access levelUser check User nameHost auth Host checkAccess level •Default: OffPriority stream ActivationDestination IP address1 Destination IP address2When “4:3” is selected for “Aspect ratio” When “16:9” is selected for “Aspect ratio”• Default: 640x360 VT164W Image capture size14Configure the settings of the servers Server SMTP server addressSMTP port POP server addressSender’s E-mailaddress Authentication–Default: None –Unavailable characters: & : ; \ •PasswordFTP server address Control portFTP mode PasswordTime adjustment NTP server address settingNTP server address NTP portTime zone Time adjustment interval•Default: 1h 15 Configuring the network settings Network 15.1 Configure the network settings NetworkNetwork Settings IPv4 networkDefault gateway IPv6 networkIP addressIPv4 Subnet maskCommon DHCPv6HTTP port Line speedUPnP HTTPSAuto port forwarding Camera short cutCA Certificate - CA Certificate install CRT key generateSelf-signedCertificate - Generate Self-signedCertificate - InformationFTP access to camera Easy IP Setup accommodate periodBandwidth controlbit rate When using the self-signedcertificateInternet WAN 15.2 Configure the HTTPS settings 1.Click the Execute button of “CRT key generate” Description Available number of charactersItem DescriptionAvailable number of characters Indication–Register the camera for Trusted Sites ItemDescription Available number of characters15.2.4 Installation of the server certificate ItemDescription Available number of characters15.2.5 Configuration of the connection protocol •Available port number: 1 - •Default:•When using the self-signedcertificate •When using the server certificate15.3 Access the camera using the HTTPS protocol 15.3.1Install the security certificate1.Access the camera using the HTTPS protocol 15 Configuring the network settings Network Operating Instructions15 Configuring the network settings Network 4.Click “Install Certificate...”Operating Instructions Operating Instructions 8.Click “Next” 15 Configuring the network settings NetworkOperating Instructions 9.Click “Finish” 10.Click “Yes” 15 Configuring the network settings NetworkOperating Instructions 11.Click “OK” 15 Configuring the network settings Network 3.Click “Install Certificate...”Operating Instructions 5.Click “Finish” 15 Configuring the network settings NetworkOperating Instructions About DDNS services IPv4/IPv6 15.4Configure the settings relating to DDNS DDNS•About Dynamic DNS Update RFC2136 compliant •DDNS service such as “Viewnetcam.com” C A D C BB D A E EGlobal address is changed 15.4.2 When using the “Viewnetcam.com” service PersonalCamera URLYour Account Link Access using the current global addressAccess interval •Default: 1h15.4.5 When using “Dynamic DNS Update” Host nameAccess interval •Default: 24h15.5Configure the settings relating to SNMP SNMP 15.4.6 When using “Dynamic DNS UpdateDHCP”Community System nameFTP periodic image transmission LocationContact FTP >>FTP periodic image transmission Transmission interval•Default: Off Default 1s15.7.1 How to set the schedules Operating Instructions15.7.2 How to delete the set schedule Operating InstructionsOperating Instructions →page Communication mode SSID•Default: wifi WEP method Encryption methodWEP key •10 hex characters: 64bitNetwork key 5 alphanumeric characters 64bit•13 alphanumeric characters: 128bit •8 to 63 alphanumeric charactersAbout Wi-FiProtected Setup WPS Operating Instructions→The wireless settings are updated Available number of characters 8 characters Using a selected PIN code set to the camera• Available characters: Numbers • Available number of characters: 8 characters 2.Configure Wi-FiProtected Setup WPS• Available characters: Numbers 16.3 Using the cameras Wireless QoS Basic Wireless QoSChecking wireless settings for the camera •Default: UseWireless module status Firmware version WirelessAuto setup WPS Mac address of the wireless moduleAuthentication method BSSIDRadio wave status Encryption methodperiod of the schedule Operating Instructions Body heat sensor permission VT164W 18 Maintenance of the camera Maintenance 18.2 Upgrade the firmware Upgrade18.1 Check the system log System log Time & dateInformation of each item will be displayed 18.3 Check the status Status Viewnetcam.com UPnPSelf check Operating InstructionsReset to the default Except the network settings Load the default HTML files setup menuReboot Operating Instructions19 Privacy Mode BL-VT164W/BL-VT164 19.3 Turning the Privacy Mode off 20 Using the CD-ROM 20.1 About the CD launcher20.2 Installing Panasonic “IP Setting Software” A B C D20.3 Installing the manuals 20.4 Installing the Viewer softwareFor Windows XP For Windows Vista/WindowsOperating Instructions Operating Instructions Error indications relating to SMTP Error indications relating to FTP21 About the displayed system log CategoryError indications relating to “Viewnetcam.com” Error indications relating to Dynamic DNS UpdateCategory IndicationError indications relating to NTP Log indications relating to loginLog indications relating to HTTPS CategoryPanasonic alarm protocol notification error CategoryIndication Description22 Troubleshooting SymptomCause/solution Reference pagesSymptom Cause/solutionWhen communicating using IPv4 Reference pagesSymptom Authentication window is displayed repeatedlyCause/solution Reference pagesSymptom Cannot access the camera from a mobile terminalCause/solution Reference pagesSymptom Cause/solutionWhen using Internet Explorer Reference pagesSymptom Cause/solutionThe movement of the camera automatically changes Reference pagesSymptom Cause/solutionH.264 images are not displayed Reference pagesSymptom Cannot connect to the wireless routerCause/solution Reference pagesInformation Bar When using Internet ExplorerSymptom Cause/solutionSymptom Cause/solutionImages are not fit in the frames Reference pagesFor U.S. and Canada Panasonic Canada IncFor Europe and other countries PGQP1208YA C0312-1042