Panasonic BL-VP104W Destination of notification, Address 1 - Address, •Available range: •Default

11 Configure the alarm settings [Alarm]

•Available range: 0-30

•Default: 2

Destination of notification

[Address 1] - [Address 8]

Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8 destination server addresses can be registered.

•[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon an alarm occurrence.

•[Destination Server address]: Enter the destination server address or host name.

–Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-).

To delete the registered destination server address, click the [Delete] button respective to the desired destination server address.

IMPORTANT

•When entering the host name of the “Destination Server address”, the DNS settings on the [Network] tab of the “Network” page must be configured. (→page 104)

•Confirm that the destination IP addresses are registered correctly. When a registered destination does not exist, notification may be delayed.

90

Operating Instructions