GB • Printed in England • BA F 016 L69 839 • QX elctric • OSW 02.02
F016 L69 839.book Seite 6 Freitag, 22. Februar 2002 10:04 10
Fault Finding
The following table gives checks and actions that you can perform if your machine does not oper- ate correctly. If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom | Possible Cause | Remedy |
|
|
|
Machine fails to oper- | Power turned off | Turn power on |
ate | Mains socket faulty | Use another socket |
| Extension cable damaged | Inspect cable, replace if dam- |
|
| aged |
| Fuse faulty/blown | Replace fuse |
|
|
|
Machine functions | Extension cable damaged | Inspect cable, replace if dam- |
intermittently |
| aged |
| Machines internal wiring damaged | Contact Service Agent |
|
|
|
Machine labours or | Height of cut too low | Increase height of cut (see “Height |
belt squeals |
| of Cut Adjustment”) |
| Blades off cut | Adjust blades |
|
|
|
Machine leaves rag- | Cutting blade(s) blunt | Contact Service Agent |
ged finish | Blades off cut | Adjust blades |
|
|
|
Cutting blades not | Cutting blades obstructed | Clear obstruction |
rotating | Belt is slipping or is damaged | Contact Service Agent |
|
|
|
Land drive does not | Incorrect adjustment | Adjust cable |
engage (self pro- | Cable damage | Contact an |
pelled models only) |
| Approved Service Agent |
|
|
|
Excessive vibration/ | Cutting blades damaged | Contact Service Agent |
noise | Cutting blades not adjusted evenly | Adjust blades |
|
|
|
Poor collection | Mowing in wet conditions | Allow grass to dry |
|
|
|
18 • F016 L69 839 • TMS • 05.02.02 | English - 6 |