GB • Printed in England • BA F 016 L69 839 • QX elctric • OSW 02.02
F016 L69 839.book Seite 5 Freitag, 22. Februar 2002 10:04 10
B G H Removing/replacing
QX Cylinder Cassette
The mower is fitted with a QX (quick exchange) cassette which can be removed and taken to Approved Service Agent for sharpening. To re- move the cassette:
It is advisable to wear a pair of gardening gloves (not supplied).
Remove grassbox cradle 11.
Remove the drive cover 20 by removing screws 21.
Remove cassette retaining screws 22 on both sides.
Remove pulley 23 and belt 24 by removing 3 screws 25.
Pull the cutting cassette unit 26 out using the handle. Obtain assistance if required.
Replace the cassette and fit retaining screws 22.
Slacken the idler pulley screw 28.
Refit the pulley 23 and belt 24.
Adjust the idler pulley 27 against the belt 24 and tighten idler pulley screw 28.
Refit the drive cover 20.
This method is the same for fitting or removing cassette accessories.
GAdjusting Drive Cable (self propelled models only)
If the mower doesn’t drive adequately it may be necessary to adjust the drive cable as follow:
Slacken nut 29, turn adjuster 30 a few turns anti- clockwise.
Retighten nut 29.
When correctly adjusted, drive to the rear roller is engaged when the drive control lever 17 is squeezed against the handle top 1 or disen- gaged when released.
After Mowing/Storage
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and de- bris, especially from the ventilation slots 8.
Turn the machine on its side and clean the blade area. If grass cuttings are compacted in the blade area, remove with a wooden or plas- tic implement.
Store the lawnmower in a dry place. Do not place other objects on top of the machine. To save space, fold up the handle fully.
☞Ensure cables are not trapped when folding/unfolding top handles, do not drop the handles.
17 • F016 L69 839 • TMS • 05.02.02 | English - 5 |
