Manuals / Panasonic / Household Appliance / Home Security System

Panasonic BL-VP100, BL-VT164W manual FTP periodic image transmission, Location, Contact, Ftp >>

Models: BL-VT164

1 180

Download 180 pages 49.05 Kb

Page 135

[Location]

15 Configuring the network settings [Network]

•Available number of characters: 0 - 32 characters

•Default: None (blank)

[Location]

Enter the name of the location where the camera is installed.

•Available number of characters: 0 - 32 characters

•Default: None (blank)

[Contact]

Enter the E-mail address or the phone number of the SNMP manager.

•Available number of characters: 0 - 255 characters

•Default: None (blank)

15.6Configure the settings relating to the FTP periodic image transmission [FTP img. trans.]

Click the [FTP img. trans.] tab on the “Network” page. (→page 34, page 35)

The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance (→page 100). Refer to page 137 for descriptions of how to configure schedules of image transmission.

IMPORTANT

•Depending on the network line speed or the network traffic, images may not be transmitted at the exact designated interval or period.

•When “On” is selected for both of the alarm image transmission function and the FTP periodic image transmission function, the alarm image transmission function will be given priority over the FTP periodic image transmission function. For this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.

FTP periodic image transmission

[FTP >>]

When “FTP >>” is clicked, the [FTP] tab of the “Server” page will be displayed. (→page 100)

Operating Instructions

135

Image 135

Panasonic BL-VP100, BL-VT164W, BL-VP104W manual FTP periodic image transmission, Location, Contact, Ftp >>

Contents

Model No. BL-VT164Series BL-VP100Series Network CameraBL-VT164WBL-VP104W Operating InstructionsAbbreviations PrefaceAbout notations Trademarks and registered trademarksOperating Instructions Viewer software1 Monitor images on a PC Table of ContentsDisplay the setup menu from a PC Configure the Internet settings Internet15 Configuring the network settings Network Configure the alarm settings AlarmConfigure the multi-screensettings Multi-screen 14 Configure the settings of the servers ServerBL-VP104W Using the CD-ROMTroubleshooting Maintenance of the camera Maintenance<Example of IPv4 access> <Example of IPv6 access> 1 Monitor images on a PC1.1 Monitor images from a single camera 1 Monitor images on a PC 4.Enter the user name and the passwordPassword: 3.Press the Enter key on the keyboard<Refresh interval of JPEG images> Live button 1.2 About the “Live” page BL-VT164W/BL-VT164Setup button*1 select language pull-downmenuZoom buttons*2 VGA QVGA 640x360 320x180 800x600 1280x720Image quality buttons AUX buttons*2Brightness buttons*2 Available range: 0 - Preset*2Alarm occurrence indication button*2 Control pad/buttons*2Main area*2 Snap shot buttonMic input button*3 Audio output button*3Operating Instructions Multi-screenbuttons Setup button*1select language pull-downmenu Live buttonImage quality buttons Alarm occurrence indication button*2QVGA 640x360 320x180 1280x720Operating Instructions Main area*21.4 Monitor images from multiple cameras 2.1 Monitor images on a cellular phone → Images from the camera will be displayed A B C D E F G H IOperating Instructions Outline of functions Functions2.2 Monitor images on a mobile terminal → Images from the camera will be displayed AUX control PresetResolution control Pan/TiltPreset VT164W VT164 Operating InstructionsPan/Tilt VT164W VT164 Image in the aspect ratio of “16 9” •Image in the aspect ratio of “4:3”AUX control buttons mode can be enabled and disabled with thePrivacy Mode control VT164W Press theZoom display VT164W VT164 Notify of alarm occurrences by E-mail 3 Action at an alarm occurrence3.1 Alarm type 3.2 Action at an alarm occurrenceOperating Instructions 4 Transmit images onto an FTP server 4 Transmit images onto an FTP server5.1 Equipped security functions 5 About the network security6.1How to display the setup menu 6 Display the setup menu from a PC<Example> 6.2 How to operate the setup menuOperating Instructions 6 Display the setup menu from a PCLive button 6.3 About the setup menu windowSetup button Alarm buttonUser mng. button Maintenance buttonSetup page Advanced func. button•Unavailable characters: & 7Configure the basic settings of the camera BasicCamera title Date/timeNTP/Time zone Time display formatDate/time display format Summer time daylight savingIndicator OSD - PositionBrightness status display Indicator status Alarm status update modeAlarm status reception port Automatic installation of viewer software•Default: English Language•Default: Off 8 Configure the Internet settings InternetUPnP Auto port forwarding DDNSRecommended network setting for internet • Default: 16:9 VT164W Aspect ratioImage capture size JPEGLive page Initial display Refresh interval JPEGDefault Quality1 Image quality settingImage quality • Default: 640x360 VT164WOperating Instructions Operating Instructions •Default: On H.2641/H.2642H.264 transmission Internet mode over HTTP•Default: 30fps Transmission priorityFrame rate Max bit rate per clientUnicast port2Audio*2 Refresh intervalTransmission type Unicast port1Image*2Multicast TTL/HOPLimit*3 •Available value: •Default:•Default: Off Image hold Home positionSelf return Self return timePan-Tiltdegree/Zoom ratio display Extra zoomAbout extra zoom Digital zoomOperating Instructions Image adjustPreset position VT164W Extra zoom VP104W VP104Operating Instructions Privacy zone•Default: Off Adaptive black stretch•Default: Off Back light compensation BLCMask area Light control modeRed gain Auto slow shutterDay & Nightelectrical White balanceAperture level 9.5.2 Set mask areasBlue gain Chroma gain levelPage 3.Click the divided areas to be masked A. Image in the aspect ratio of “16 9” 9.5.3.1 Register the preset positions •Default: Off Preset IDPreset ID 0-9,A-Z Position NoSet button Delete buttonClose button Zone select Zone settingPrivacy zone Display typeOperating Instructions AreaClose button Display type•Default: Off Close buttonOperating Instructions Audio transmission/reception Audio encoding format•Default: G.726 Mic input interval Camera to PC Mic input volume Camera to PCAudio output volume PC to Camera Audio bit rate•Default: Audio output port PC to CameraPermission level of audio trans./recep Muting while panning/tilting10Configure the multi-screensettings Multi-screen IP addressExample of entry •Unavailable characters: & •Default Camera title•Available number of characters: 0 - 20 characters Terminal 2 VT164W 11 Configure the alarm settings AlarmAlarm Terminal 1 VT164WBody heat sensor VT164W VT164 VMD alarmCommand alarm Terminal 3 VT164WTerminal alarm Camera action on alarmOriginating port number •Available range: •Default:Body heat sensor •Default: Off VMD alarm•Default: Off Command alarm •Default: OffFTP >> Alarm imageAlarm image FTP transmission Post alarmAlarm output trigger Alarm output terminal setupImage compression rate upon alarm detection Image quality upon alarm detectionAUX Up to 10 characters 11.5Change the AUX name Alarm BL-VT164W/ BL-VT164AUX title Pulse width11.6 Configure the VMD settings VMD area VMD area setting BL-VT164W/BL-VT164Select a preset position All areas button VT164W Procedure for setting the VMD areaVMD information addition Information additionLight detection control StatusDetection area Detection sensitivityE-mailserver E-mailnotificationAddress 1 - Address Alarm image attachmentDestination of notification E-mailnotificationDestination port Panasonic alarm protocol notificationPanasonic alarm protocol Additional alarm area dataVMDOperating Instructions •Available range: •Default:Destination of notification Address 1 - AddressXML notification XML notificationNotification interval Destination setting for XML notificationPassword Notification dataXML notification Face detectionFace detection •Default: OffAuthentication User auth•Default: On User name Password Retype passwordAccess level User check•Default: Off Host authHost check Access levelDestination IP address2 Priority streamActivation Destination IP address1Image capture size When “4:3” is selected for “Aspect ratio”When “16:9” is selected for “Aspect ratio” • Default: 640x360 VT164WPOP server address 14Configure the settings of the servers ServerSMTP server address SMTP port–Unavailable characters: & : ; \ •Password Sender’s E-mailaddressAuthentication –Default: NonePassword FTP server addressControl port FTP modeNTP port Time adjustmentNTP server address setting NTP server addressTime adjustment interval Time zone•Default: 1h 15.1 Configure the network settings Network 15 Configuring the network settings NetworkIPv4 network Network SettingsSubnet mask Default gatewayIPv6 network IP addressIPv4Line speed CommonDHCPv6 HTTP portCamera short cut UPnPHTTPS Auto port forwardingSelf-signedCertificate - Information CA Certificate - CA Certificate installCRT key generate Self-signedCertificate - GenerateWhen using the self-signedcertificate FTP access to cameraEasy IP Setup accommodate period Bandwidth controlbit rateInternet WAN 15.2 Configure the HTTPS settings 1.Click the Execute button of “CRT key generate” Available number of characters DescriptionIndication ItemDescription Available number of charactersAvailable number of characters –Register the camera for Trusted SitesItem DescriptionAvailable number of characters 15.2.4 Installation of the server certificateItem Description•When using the server certificate 15.2.5 Configuration of the connection protocol•Available port number: 1 - •Default: •When using the self-signedcertificate15.3.1Install the security certificate 15.3 Access the camera using the HTTPS protocol1.Access the camera using the HTTPS protocol Operating Instructions 15 Configuring the network settings Network4.Click “Install Certificate...” 15 Configuring the network settings NetworkOperating Instructions Operating Instructions 15 Configuring the network settings Network 8.Click “Next”Operating Instructions 15 Configuring the network settings Network 9.Click “Finish” 10.Click “Yes”Operating Instructions 11.Click “OK” 3.Click “Install Certificate...” 15 Configuring the network settings NetworkOperating Instructions 15 Configuring the network settings Network 5.Click “Finish”Operating Instructions 15.4Configure the settings relating to DDNS DDNS About DDNS services IPv4/IPv6•About Dynamic DNS Update RFC2136 compliant C A D C BB D A E E •DDNS service such as “Viewnetcam.com”Global address is changed Access using the current global address 15.4.2 When using the “Viewnetcam.com” servicePersonalCamera URL Your Account Link•Default: 1h Access interval•Default: 24h 15.4.5 When using “Dynamic DNS Update”Host name Access intervalSystem name 15.5Configure the settings relating to SNMP SNMP15.4.6 When using “Dynamic DNS UpdateDHCP” CommunityFTP >> FTP periodic image transmissionLocation ContactDefault 1s FTP periodic image transmissionTransmission interval •Default: OffOperating Instructions 15.7.1 How to set the schedulesOperating Instructions 15.7.2 How to delete the set scheduleOperating Instructions →page SSID Communication mode•Default: wifi •10 hex characters: 64bit WEP methodEncryption method WEP key•8 to 63 alphanumeric characters Network key5 alphanumeric characters 64bit •13 alphanumeric characters: 128bitOperating Instructions About Wi-FiProtected Setup WPS→The wireless settings are updated Using a selected PIN code set to the camera Available number of characters 8 characters• Available characters: Numbers 2.Configure Wi-FiProtected Setup WPS • Available number of characters: 8 characters• Available characters: Numbers •Default: Use 16.3 Using the cameras Wireless QoS BasicWireless QoS Checking wireless settings for the cameraMac address of the wireless module Wireless module statusFirmware version Wireless Auto setup WPSEncryption method Authentication methodBSSID Radio wave statusperiod of the schedule Operating Instructions Body heat sensor permission VT164W Time & date 18 Maintenance of the camera Maintenance18.2 Upgrade the firmware Upgrade 18.1 Check the system log System logInformation of each item will be displayed 18.3 Check the status Status Operating Instructions Viewnetcam.comUPnP Self checkOperating Instructions Reset to the default Except the network settingsLoad the default HTML files setup menu Reboot19 Privacy Mode BL-VT164W/BL-VT164 19.3 Turning the Privacy Mode off 20.1 About the CD launcher 20 Using the CD-ROMA B C D 20.2 Installing Panasonic “IP Setting Software”For Windows Vista/Windows 20.3 Installing the manuals20.4 Installing the Viewer software For Windows XPOperating Instructions Operating Instructions Category Error indications relating to SMTPError indications relating to FTP 21 About the displayed system logIndication Error indications relating to “Viewnetcam.com”Error indications relating to Dynamic DNS Update CategoryCategory Error indications relating to NTPLog indications relating to login Log indications relating to HTTPSDescription Panasonic alarm protocol notification errorCategory IndicationReference pages 22 TroubleshootingSymptom Cause/solutionReference pages SymptomCause/solution When communicating using IPv4Reference pages SymptomAuthentication window is displayed repeatedly Cause/solutionReference pages SymptomCannot access the camera from a mobile terminal Cause/solutionReference pages SymptomCause/solution When using Internet ExplorerReference pages SymptomCause/solution The movement of the camera automatically changesReference pages SymptomCause/solution H.264 images are not displayedReference pages SymptomCannot connect to the wireless router Cause/solutionCause/solution Information BarWhen using Internet Explorer SymptomReference pages SymptomCause/solution Images are not fit in the framesPGQP1208YA C0312-1042 For U.S. and CanadaPanasonic Canada Inc For Europe and other countries