Panasonic BL-VP104W, BL-VT164 Multicast TTL/HOPLimit*3, •Available value: •Default, •Default: Off

9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)

Note

•When audio is transmitted from the unit, the port number to be used will be the multicast port number plus “1000”.

[Multicast TTL/HOPLimit]*3

Enter a value for “Multicast TTL/HOPLimit”.

•Available value: 1-254

•Default: 16

IMPORTANT

•When transmitting an H.264 image via a network, the transmitted image sometimes may not be displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network administrator.

•When two or more network interface cards are installed on the PC in use, the network interface card(s) not used for receiving images should be invalidated when displaying images using the multicast port.

[Smoother live video display on the browser (buffering)]

Perform settings to display camera images on the viewer software.

•On: Images are temporarily stored on the computer and are displayed smoother.

•Off: Images are displayed in real-time and are not stored on the computer.

•Default: Off

*1 VT164W VT164 VP104W VP104

*2	It is necessary to designate the unicast port number when “Unicast port (MANUAL)” is selected for “Transmission type”.
*3	It is necessary to designate the multicast IP address when “Multicast” is selected for “Transmission type”.

54

Operating Instructions