Problem solving guide

With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department.

,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

Check and fault messages

Problem

Possible cause

Remedy

The programme stops

This is not a fault.

– Use the Warm air

and 0 and Finish appear

The electronic unit has

programme (timed

in the display.

recognised that there is

drying) to dry individual

The buzzer sounds.

no laundry in the drum

items.

 

and cancelled the

To delete the fault

 

programme.

message:

 

Drying individual

– Open and close the

 

garments or items which

door.

 

are already dry can also

 

 

cause the programme to

 

 

be cancelled.

 

The Low temperature

The electronic system

You will need to

indicator light starts

lock is activated.

deactivate the system

flashing after the dryer

 

lock before the dryer can

has been switched on

 

be used (see "Electronic

and 0-§appears in the

 

system lock").

display.

 

 

The programme stops

No obvious cause.

– Switch the dryer off

and Cooling down or

 

and then on again.

Finish flashes in the

 

– Then start the

display.

 

programme again.

The buzzer sounds.

 

If the programme stops

 

 

again and Cooling down

 

 

or Finish flashes again

 

 

there is a fault. Contact

 

 

the Miele Service

 

 

Department.

28

Page 28
Image 28
Miele T 7744 C operating instructions Problem solving guide, Check and fault messages