Installation and connection
Rear view | Installation site |
aProtruding lid for holding when moving the machine (see arrows)
bAir inlet vent for cooling the condenser unit
cMains connection cable
dExternal drainage of the condensed water
eAccessories for connection to a sink drain outlet
,The machine lid must not be removed.
The dryer can be pushed under a worktop with its lid in place, providing the worktop is high enough.
,Make sure the dryer door can be opened without hindrance after installation.
Transporting the machine to its installation site
When moving the machine, you can hold it by the lid where it protrudes to the rear of the dryer. To manoeuvre the dryer out of its packing case to its installation site you will also need to hold it by the front feet.
Washer-dryer stack
The tumble dryer can also be combined with a Miele washing machine in a
,Stacking kits must only be installed by a suitably qualified fitter.
36
