Clean out airways indicator, Default setting | Miele T 7744 C

Programmable functions

Clean out airways indicator

Fluff should be removed after drying. The Clean out airways indicator will remind you to clean the filters when a certain amount of fluff has collected in the filters. You can decide at what level of fluff this reminder should be given.

You will have an idea of which of the four options to select after a few drying programmes.

Follow steps A to F to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

APress the Start/Stop button and keep it pressed in whilst carrying out steps

B-C.

BPress the I-On/0-Offbutton in.

Wait until the indicator light for the Start/Stop button lights up constantly . . .

C. . . and then release the Start/Stop button.

DPress the Low temperature button four times.

–The Low temperature indicator light will flash on and off slowly once.

–P and 2 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0The Clean out airways indicator light is deactivated

IThe Clean out airways indicator light will come on when there is a heavy build-up of fluff

(The Automatic indicator light will also flash once).

2Default setting

(the Automatic indicator light will also flash twice).

3The Clean out airways indicator light will come on when there is only a light build-up of fluff (The Automatic indicator light will also flash three times).

EPressing the Start/Stop button switches from one to the other.

FSwitch the dryer off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

49

Image 49

Miele T 7744 C operating instructions Clean out airways indicator, Default setting

Contents

Operating instructions For condenser tumble dryer T 7744 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Contents Technical safety Safety with childrenCorrect application Correct use Page Accessories Control panel Operating the tumble dryerDisplay Check lights Programme duration / Estimated time remaining Delay startProgrammable functions Tips on drying Care symbols Brief instructions How to dry correctlySort the laundry Turn on the tumble dryer Select any additional options Select a programme Start the programme Remove the laundry when the programme has finishedBefore the end of a programme Low temperature Extra options / Delay startDelay start Buzzer Programme chart Smoothing Woollens handcareAutomatic Shirts Warm air Cool air Changing the programme sequence Cancelling a programmeChanging a programme while it is running Interrupting a programme To activate the lock Electronic system lockTo deactivate the lock Emptying the condensed water container Cleaning and carePull out the container Empty the container Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Replacing the condenser unit Check and fault messages Problem solving guide Airways indicator Problem Possible cause RemedyTo switch off the indicator Buzzer sounds To switch off the indicator Light Other problems Been cleaned Problem Possible cause Remedy Water leaks fromDryer after Condenser unit has Start when switched on Problem Possible cause Remedy Tumble dryer fails toInterior drum Lighting does not come Changing the lamp Future updates PC After sales serviceGuarantee Optional accessories Front view Installation and connection Transporting the machine to its installation site Rear view Installation siteWasher-dryer stack Levelling the machine Before moving the machine again e.g. when moving houseRoom ventilation General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valve Installation and connection Electrical connection Non-rewireable plugs BSElectrical connection U.K Smoothing Consumption data Technical data Programmable functions For changing default settings Extending the range of the drying levels Programmable functions Normal buzzer Default setting Loud buzzer Altering the volume of the buzzerFollow steps a to F to programme and store in memory Memory function Memory deactivated Default setting Memory activated Cooling down time will be ten minutes longer Extending the cooling down time Default setting Clean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070