1 Adapter
2 Nut
3 Hose clip
4 End of the hose
5 Non-return valve
6 Dryer drain hose
^Fit adapter 1to the sink drain outlet
using nut 2.
If this nut has a flat disc in it you
should take the disc out first.
^Attach the end of the hose 4to
adapter 1.
^Use a screwdriver to tighten hose
clip 3up close to the nut.
,The non-return valve 5must only
be fitted in an upright position or at a
slight angle (see illustration). If it is
fitted in a horizontal position it will
not work correctly.
^Fit the non-return valve 5to the drain
hose of the dryer 6(make sure it is in
the correct position, see illustration).
^Secure the non-return valve using
hose clips.
Installation and connection
40