Keypad tone | Miele T 7744 C manual

Programmable functions

Keypad tone

An audible tone sounds each time a button is pressed.

Follow steps A to F to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

APress the Start/Stop button and keep it pressed in whilst carrying out steps

B-C.

BPress the I-On/0-Offbutton in.

Wait until the indicator light for the Start/Stop button lights up constantly . . .

C. . . and then release the Start/Stop button.

DPress the Low temperature button five times.

–The Low temperature indicator light will flash on and off slowly once and will then flash on and off quickly once.

–P and 0 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Keypad tone deactivated (Default setting)

iKeypad tone activated

(The Automatic indicator light will also flash)

EPressing the Start/Stop button switches from one to the other.

FSwitch the dryer off with the I-On/0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

50

Image 50

Miele T 7744 C operating instructions Keypad tone

Contents

Operating instructions For condenser tumble dryer T 7744 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tips Contents Contents Correct application Safety with childrenTechnical safety Correct use Page Accessories Display Operating the tumble dryerControl panel Check lights Programmable functions Delay startProgramme duration / Estimated time remaining Care symbols Tips on drying Sort the laundry How to dry correctlyBrief instructions Turn on the tumble dryer Select a programme Select any additional options Before the end of a programme Remove the laundry when the programme has finishedStart the programme Delay start Extra options / Delay startLow temperature Buzzer Programme chart Automatic Woollens handcareSmoothing Shirts Cool air Warm air Changing a programme while it is running Cancelling a programmeChanging the programme sequence Interrupting a programme To deactivate the lock Electronic system lockTo activate the lock Pull out the container Cleaning and careEmptying the condensed water container Empty the container Cleaning the fluff filters Cleaning them whilst dry Cleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unit Checking the condenser unit Replacing the condenser unit Problem solving guide Check and fault messages To switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator Light Other problems Dryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Condenser unit has Interior drum Problem Possible cause Remedy Tumble dryer fails toStart when switched on Lighting does not come Changing the lamp Guarantee After sales serviceFuture updates PC Optional accessories Installation and connection Front view Washer-dryer stack Rear view Installation siteTransporting the machine to its installation site Room ventilation Before moving the machine again e.g. when moving houseLevelling the machine Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gully Installation and connection Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Smoothing Technical data Programmable functions For changing default settings Programmable functions Extending the range of the drying levels Follow steps a to F to programme and store in memory Altering the volume of the buzzerNormal buzzer Default setting Loud buzzer Memory deactivated Default setting Memory activated Memory function Extending the cooling down time Cooling down time will be ten minutes longer Clean out airways indicator Default setting Keypad tone Adjusting the dryers electronics for very soft water Alteration rights reserved/1807 Nr 737 070