Operating the tumble dryer
Display
The following are selected via the display:
–Delay start
–Duration of the Cool air and Warm air programmes
–Programmable functions
The display also shows:
–Programme duration
–Programme stage Drying
Cooling down Finish
–Check and fault messages
Programme duration / Estimated time remaining
When a programme is selected, the estimated duration (time remaining) will appear in the display. Please be aware that it is only an estimate!
The following factors all affect the estimated time remaining: residual moisture content after spinning; type of fabric; size of load; room temperature; fluctuations in power supply.
The electronics continually assess conditions in the dryer and adjust the estimated time remaining for a more accurate reading. Because of this, the time displayed can alter during the course of a programme.
In the same way, the Woollens handcare, Silks handcare and Smoothing programmes can finish earlier than expected if a certain temperature is reached. This can happen with particularly fine fabrics, very small loads or if items were partly dry beforehand.
Delay start
The delay start time selected will appear in the display.
After the Start/Stop button has been pressed, the delay start time will start counting down.
Once the delay start time has elapsed, the programme will begin and the estimated programme duration will appear in the display.
Programmable functions
The programmable functions can be used to tailor drying programmes to suit your individual requirements. In programming mode, the display will show the function selected.
10
