9-6CHAPTER 9: MONITORING THE ATM MODULE

Port ID Identifies the currently selected port.

VLAN Allows you to select the VLAN you wish to monitor. The default is VLAN 1. If you wish to review the state of all VLANs on the ATM Module, see “ATM Port Setup” on page 8-6.

Table 9-3Last LEC Failure Reason

State

Possible Causes

Possible Solutions

 

 

 

None

The LEC is either

None required.

 

inactive or has

 

 

successfully completed

 

 

the operation.

 

LEC State Shows the state of the LEC to LES communication. The states are shown in Table 9-2.

Table 9-2LEC State Summary

LEC State

Description

 

 

Active

The LEC is in use.

Inactive

The LEC is not in use. The LEC may be

 

inactive because it has not been able

 

to establish communication with the

 

LES and BUS, or because the ATM port

 

has been disabled by management.

Not in Use

You have specified that the LEC is not

 

required at the present time.

 

 

LEC ELAN Name Shows the name of the ELAN that the VLAN/LEC has joined.

Timeout

A task could not be completed within its allotted time frame.

The software has been set up to use a LECS, but a LECS is either not present on the network or broken.

The LES for the ELAN is not functioning correctly

If there is a LECS on your network, ensure that it is operational and on part of the network that can be accessed by the ATM Module.

If a LECS is not present on the network, you must enter the LES Address for each ELAN manually using the ATM VLAN Setup Screen (see “Extending VLANs into the ATM Network” on page 8-4).

Contact Technical Support.

LEC ATM Address Shows the ATM Address of the LEC associated with the selected VLAN.

Last LEC Failure Reason If the LEC configuration fails, the last know failure state is shown. The failure state can be used to identify the cause of the failure. The failure state and possible causes are shown in Table 9-3.

Undefined Error

Unknown.

Contact Technical

An error has

 

Support.

 

 

occurred but no

 

 

cause can be

 

 

identified.

 

 

 

 

 

Version Not

The LANE services you

Ensure that the LANE

Supported

are trying to connect

Services use LANE 1.0.

LANE 1.0 not

to, do not support

 

LANE version 1.0.

 

supported.

 

 

 

 

 

 

(continued)

 

 

 

 

 

Page 72
Image 72
IBM ATM OC-3c State Possible Causes Possible Solutions None, LEC State Description, Timeout, Undefined Error, Version Not