Solving Known Problems |
ATM Problems
Table
Problem | Possible Causes | Possible Solutions |
The ATM Connection Table is | ■ The ATM Switch connected to the ATM | ■ Check that the devices at both ends of the |
only showing reserved ATM | Module is using a different VPI:VCI value | connection are using the same ILMI VPI:VCI. |
Connections | for ILMI. | ■ Check version of signalling in use. The ATM Switch |
|
| |
Symptoms: |
| must use version 3.0 or 3.1 to be able to |
■ The VLAN LEC Status screen, |
| communicate with the ATM Module. |
|
| |
described in “ATM VLAN |
|
|
LEC Status” on page |
|
|
shows that the LEC is |
|
|
Inactive and there is no |
|
|
network prefix for the LEC |
|
|
ATM address. |
|
|
