Usingthe Doihy®DigRal Dynamic

Range Control feature

This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing
you to switch from ATSC to analog broadcasts at the
same dynamic range.

To use tile Dolby Digital Dynamic Range

Control:

MENU
IPress O and open the Sound menu.
2 Highlight AUdiO Setup and press @.
3[n the DoJby Digital DynamicRangeControlfield,

selectCompressed.WhenStandardisselected,

the audio is output with minimal compression.
4 Tosave the new settings, highlight Done and
press @.
To revert to the factory defaults, highlight Reset
and press @.
Note:
°This item will be grayed out for NTSC signals,
Video, ColorStream, and PC inputs.
°The Dolby Digital Dynamic Range Control will
function in relation to Optical Output Format
(PCM mode).
Usingthe Locks menu
The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Input Lock, Front
(Control) Panel Lock, GameTimer, and New PIN
Code features. You can use these features after
entering the correct PIN code.
Enteringthe PiNcode
MENU . .
IPress 0and h@fl@at the Locks menu icon.
Press V, which displays the PIN code entry
screen.
*The Lock System screen (below) aF_pears if a
48
PIN code has not been stored. Press the Channel
Number buttons to enter a new four-digit code,
enter the code asecond time to confirm, and
press @.
•The Locks/Activescreen appears if the PIN code
is already stored. Use the Number buttons to
enter your four-digit code and press @.
If the wrong PIN code is entered, the message
"Incorrect PIN code, please try again!" appears.
Highlight Retry and press @. Enter the code again
and press @.
When the correct PIN code is entered, the Locks menu
opens.
Note:
PiN code can not be set to "0000".

if youcannot rememberyourPiN code

While the PIN code entering screen is displayed, press
RECALL
O four times within five seconds. The PIN code will
be cleared and you can enter a new PIN code.
ChangingyourPiNcode
MENU
Press O and highlight the Locksmenu icon.
Press T to display the PIN code entering screen.
Enter your four-digit PIN code and press @.
Press Y to highlight [,lew PiN Codeand press @.
5 Press the Number buttons to enter a new four-
digit code. Reenter the PIN code to confirm it.
6 Press @. The new PIN code is now active.
Note:
PIN code can not be set to "0000".
BlockingTVprogramsand moviesbyrating (V-Chip)
Some TV programs and movies include signals that
classify the content of the program (violence, sex,
(c'onrin ued)
40_46 55G300U EN-ASindb 46 2010/3/16 T@ 05:4&04