Preparing the remote control for
use
Your TV remote control can operate your TV and
many other devices such as cable converter boxes,
satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even ifthey are different
brands.
If you have a Toshiba device:
Your TV remote control ispreprogrammed to operate
most Toshiba devices (_x"page 23).
ff you have anon-Toshiba device or a
Toshiba device that the remote control is not
preprogrammed to operate:
You call program the TV remote control so it will
operate theother device (t:_pages 23-27).
Instaflingthe remotecontrol
batteries
1 Remove tile battery cover from tileback of tile
remote control. o
and lift cover. o
Install two "AAA" size batteries, making sure to
match the + and - signs on the batteries to the
signs on the battery compartment.
)Reinsert the battery cover ill the remote control
until the tab snaps.
Caution: Batteries must not be exposed to
excessive heat such as sunshine, fire or the
like.
Note:
oBe sure touse AAA size batteries.
oDispose of batteries in a designated disposal
area.
o Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
oIf the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
oWhen necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new and used batteries in combination.
,, Always remove batteries from the remote
control ff they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
Remote control effective range
For optiz_aul_a perforl_aance, aim tile remote control
directly atthe TV and make surethere is no
obstruction between the remote control and the TV.
Point remote control toward
remote sensor onfront ofTV.
16.4 ft (5m)
21
40_46 55G_00U EN-ASindb 21 2010/_/16 iv@ 05:48:28