Toshiba 40G300U, 40G30U, 46G30U Setting the sleep timer, UsingREGZA-LIRR, Manual Setup, Auto Setup

Auto Setup

1 Press M_U and 4 or _ to select the Setup menu.

Press A or V to highlight Retwork Setup then press EN@.

3Press V to highlight Auto Setup, and then press 4 or _ to select 0u (default).

Manual Setup

This setup requires the data listed below. You can get this data from either your [SP or the configuration

utility for your DSL/cable modem or router.

1 Press M_U and "9 or _ to select the Setupmenu.

2Press ,ik or Y to highlight Network Setup,and then press @.

3Press V to highlight Auto Setup, and then press "_ or _ to select 0f.

4.Press V to highlight IP Address field, and then

use the Number buttons on the remote control to input the [P Address.

5Press _!' to highlight the Subnet Mask field, and

then use the Number buttons to input the Subnet Mask.

6Press @.

Setting the sleep timer

You can set the sleep timer to turn off the TV after a

set length of time (maximum of 180 minutes).

To set the sleep timer using the remote eontroh

SLEEP

Press (3 on the remote control to set the length of

SLEEP

time until the TV turns off. Repeatedly press O to

increase the time in 10-minute increments, or press

&or V" to increase or decrease the time in 10-minute

increments, to a maximum of 180 minutes.

56

To set the sleep timer using the on-screen menus:

Press MENU(3 and open the Setup menu.

Highlight Sleep Timerand press @.

3Press the Number buttons to enter the length of

time in 10-minute increments.

4.Highlight [}oRe and press @.

Note: When a power failure occurs, the sleep timer setting may be cleared.

To display the remaining sleep time:

SLEEP

Press (3.

Note: k message will display on-screen when

there is one minute remaining on the sleep time_

To cancel the sleep timer:

SLEEP

Repeatedly press 0 until it is set to 0 minute.

UsingREGZA-LIRR®

This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK

compatible devices fi'om the TV remote via HDM[

connection (_:_ page 17).

When the Enable REGZA-LINK in the REGZA- LINK setup menu (_:_ page 57) is set to 0u, the

following REGZA-LINK functions will be enabled.

REGZA-LINR®playback device (DVD player, etc.) control

With your TV's remote control, or using the REGZA- LINK Player Control menu, you can control the

connected REGZA-LINK playback device you are watching.

Available remote control key functions:

Before using the following key functions, first set the MODE SELECT switch on the remote control to TV.

PLAY
C_3	Begins	playback.
STOP
(2_)	Stops	playback

PAUSE/STEP Pauses the picture during play or record mode.

SKiP
(!_E)	Skips	forward.
stop	Skips	backward.

(comin ued)

40_46 55G300U EN-ASindb 56 2010/3/16 T@ 05:4&16