Toshiba 40G300U, 40G30U, 55G300U TheaterWide2 and 3 only, Usingthe autoaspect ratiofeature, Native

Native

{for 480i {HDIVil),4SOp{HDiVil),720p, 1080i, and 1080p signal programs)

000i©©©

®If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the

borders of the screen (i.e. no overscanning).

,,This is especially useful for external HD sources such as DVHS movies, or PC graphics.

Note:

®This mode is supported only for HDMI

(1080p, 1080i, 720p, 480p, and 4800, ColorStream

(1080i and 720p), and ANTi CABLE (digital) inputs (1080p, I080i, and 720p).

,,Depending on the input signals, the border of the picture may be hidden, displayed in black, or nois_

got by Dot

(for VGA, SVGA, RGA, WXGA, and

SXGAsources only)

The "Dot by Dot" picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)

,:: To view the hidden areas (such as subtitles or captions), see below "Scrolling the TheaterWide @)

picture".

Scrolling the TheaterWide ® picture

(TheaterWide2 and 3 only)

You can set separate scroll settings tBr the TheaterWkle 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

Press MENUO and open the Picturemenu.

Highlight TheaterSettingsarid press _.

3[n the PictureSize field, select either TheaterWide

2 or TheaterWide 3 (you cannot scroll in any other mode).

4. Dess V to highlight the Picture Scroll field.

SDess "_ or _" to scroll the picture up and down as needed.

6To save the new settings, highlight Done and

press _. To revert to the factory defaults, highlight Reset and press _.

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Usingthe autoaspect ratiofeature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

,,A 480i, 480p, 720p, 1080i digital signal from the

ANT/CABLEinput

,,A 480i signal from the VIDEO1 or VIDEO2 input

,,A 480i signal from the C010rStreamHDinput

,,A 480i, 480p, 720p, 1080i, 1080p, orVGA (60Hz) signal from the NDMI1/2/3/4 input

4:3 normal		Natural (with sidebars)
4:3 letter box		TheaterWide	2
16:9 full		Full
Not	defined (no	The current	picture	size you
[D-I	data or	set under "Selecting		the
HDM[ aspect data)		picture size" on page 39.

Note: The auto aspect ratio feature is not applicable to PC input.

(co_lti_lu('d)

41

_0_46 55G300[J £N-ASindb 41 2010/3/16 T@ 05:48:59