Setup/Installationmenu layout
The Installation menu contains the Terrestrial and System Status menus.
MENU
To open the Installation menu (illustrated below), press © on the remote control or TV control panel, open the
Setupmenu, select Installation,and press @.
Terrestrial [nput Configuration + [Opens the [nput Configuration menu]
Channel Program + [Start] + [Scans for new channels on ANT/CABLE]
Channel Options + [Opens the Skip / Lock Channel menu]
Channel Tuning Mode + Standard /Auto /Digital
Eastern /Newfoundland /Atlantic /Hawaii /Alaska /
Time Zone Pacific /Mountain /Central
Signal Meter + [Opens the Signal Meter menu]

SystemStatus

Navigatingthe menusystem
You can use the buttons on the remote control or TV
control panel to access and navigate your TV's on-
screen menu system.
MENU
,, Press O to open the menu system.

Note:

The menu background may sometimes appear
black, depending on thesignal the TVis
receiving. This is not asign of malfunction.
When amenu is open, usethe up/down/left/right
arrow buttons (,A. V .,q _) on the remote control
or TV control panel to move in the corresponding
direction in the menu.
Press @ tosave your menu settings or select
a highlighted item. (A highlighted menu item
appears in a different color inthe menu.)
All menus close automatically if you do not make
a selection within 60 seconds, except the signal
ineter menu, which closes automatically after
about 5minutes.
EXIT
To close amenu instantly, Fess O•
29
40_46 55G300U EN-ASindb 29 2010/3/16 T@ 05:48:39