Toshiba 46G30U DisplayingTV status information, Feature, Understandingthe last mode memoryfeature

From this item, you can set your audio output preference to the TV speakers or the audio receiver speakers. When

® Stereo, Mono or SAP audio status (when HDMI input

mode, Dolby Digital or PCM)

® Video resolution

Speaker

this item is set toAudio Receiver. the TV remote can be used to adjust

® Aspect	ratio of incoming video signal (4:3 or 16:9)
® V-Chip	rating status

Preference

or mute the volmne of the audio.

This item will be grayed out unless a REGZA-L[NK compatible audio receiver is connected.

Note: When you turn on the Audio Receiver, change its input source, or adjust the sound volume, the sound will be output from the audio receiver's speakers even ff TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers.

To set the REGZA-LINK<_Setup:>

1From the Setup menu, highlight REGZA-LNK

Setup and press @.

2Press A or V to highlight Enable REGZA-LIRK.

3Press 4 or _ to select 0u.

Note: If you select Enable REGZA-UHKOff,the other items will be grayed out.

4Press A or V to highlight the REOZA-LINRSetup

item you want to use, and press 4 or _ to select 0u or desired mode.

*TV Auto [uput Switch: Ou/Off

*TV Auto Power: Ou/Off

*Device Auto Standby: On/Off

° Speaker Preference: TV Speakers/Audio Receiver

5To save the new settings, highlight D0ue and press @E_.To revert to the factory defaults, highlight Resetand press @.

DisplayingTV status information

To display TV status information using

RECALL:

RECALL

Press O on the remote control.

The following information will display (if applicable):

*Current input (ANT/CABLE, VIDEO1, etc.)

*If ANT/CABLE is the cun'ent input, either "CABLE" (for cable TV) or "ANT" (l_r over-the-air broadcasts).

®Channel nmnber (if in ART/CABLEmode)

®Channel label (if set)

®Digital signal strength indicator (bar graph in lower right corner of box: t\_r ATSC signal only)

58

® Game Timer (if set)

To close the RECALL screen:

RECALL

Press O again.

To display TV status information using INFO:

INFO

Press O on the remote control.

The following additional information will display for off air digital channels (if applicable):

® Title

*Duration

*Detailed description

Note: The location of the banner can be moved to the top or bottom of the screen by pressing A or V while the RECALL or INFO display is on- screen.

Understanding the auto power off

feature

The TV will automatically turn itself off alter approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ART/CABLEmode only.

Understandingthe last mode memoryfeature

If the prover is cut off while you are viewing the

TV, the Last Mode Memory feature automatically

turns on the TV when the power is resupplied.

Note: If it's possible, and you will be away

from the TV for an extended period of time you should unplug the power cord.

40_46 55G300U EN-ASindb 58 2010/3/16 T£-05:44:19