To tulle to a channel or input in Select mode:
_ACK _Xl
] While watching TV, press _ '_ or _ t_ to open the Channel Browser TM and surf back to a previous item or tbrward to the next item in the list.
In Select mode, when you stop on an item in the
Channel Browser rlx[, it will be highlighted but you must press @ to tune the TV to the highlighted item.
2 Press @ to tune the TV to the highlighted item.
EXIT
3 Press © to close the Channel Browser TM.
Addingand clearing channels anti inputs in the HistoryList
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser TM adds it to the History List and displays it on the "right
side" of the Channel BrowserrrxL Previously tuned
channels/inputs are "shifted" to the left, eventually moving off the left side. Press _ "_1to surf backward
through the previously tuned channels/inputs. Any
channel or input that is tuned repeatedly will not be repeated in the History List, but instead is moved to the end of the list on the right side of the Channel Browser TM.
The Channel Browser "lxlwill store the following channels:
,,All channels that are tuned using the numeric buttons on the remote control.
,,All channels that are tuned using c_ or _J on the remote control.
Note: Whenever an item is selected that cannot be tuned (for various reasons), the TV will automatically tune to the previously viewed channel or input.
Clearing channels from the History List:
,,Reconfiguring the ANT/CABLE input will clear the History List.
Note: See page 30 for details on configuring
the antenna input.
,,Once 32 channels or inputs are stored in the History List, the oldest item will be removed from the list
when a new channel or input is tuned.
,,Turning off the TV will clear the History List.
SetUngthe ChannelTuningNode
This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV
is in Antenna mode.
Note: To use this feature, the Input Configuration must be set to Antenna (_, page 30).
The channel tuning mode has three options.
Standard Both analog and digital channels can be tuned normally
Digital channels will have priority when
Auto | manually | entering a channel |
| number | |||||
| using | the Channel | Number | ||||||
(default) | remote |
| control, | analo,, | channels | can | |||
| • |
| tuned | by |
| OH | .. |
| . |
| snll be | cm_/c_, | if | available | |||||
Digital | Only | digital | channels | can | be | tuned | |||
Note: Digital mode will be most useful after analog channels are shut down by the government in 2009.
To set the Channel Tuning Mode:
1From the Setnpmenu, highlight installationand press @. A new set of installation menu icons will appear.
Open the Terrestrial menu, highlight Channel Tnning Node, and then press _ to select your desired mode.
Note:
o The Channel Options windows as well as the Channel Browser ANT/CABLE list will be updated automatically when you change the
mode. Also, the History List will be cleared, but the Favorites List will be saved.
o Even if the Channel Tuning Mode is set to
Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans. (Channel Options will not have anything listed until a scan is done.)
38
40_46 55G_00U | 88 | 2010/_/16 qv@ 05:48:55 |
