Toshiba 46G300U, 40G30U, 40G300U Tuningto the next programmed channel, SelecUng the picture size

Tuningto the next programmed channel

To tune	to the next	programmed	channel:
Press (_	OH	remote control	or TV control
	or _T_3on the
panel.

Note: This feature will not work unless you program channels into the TV's channel memory

(_, page 31).

Tuningto a specific channel (programmedor unprogrammed)

Tuning analog channels:

Press the Channel Number (0-9) on the remote control. For example, to select channel 125, press 1,2, 5, then @.

Tuning digital channels:

Press the Channel Number (0-9) on the remote

control, followed by the dash (@) button and then the sub-channel number. For example, to select digital channel 125-1, press i, 2, 5, -, 1, then @.

Note: If a digital channel is not programmed-- either through the automatic channel scan (_ page 31) or the Channel add function (_ page 32)--you will have to tune the RF channel using the Channel Number and dash ((!_)) on the remote control.

Switchingbetweentwo channels usingChannelReturn

The Channel Return feature allows you to switch

between two channels without entering an actual channel number each time.

1Select the first channel you want to view.

2Select a second channel using the Channel

Number buttons (and the dash ((_)) button if selecting a digital channel).

Press CHORTN on the remote control. The previous

CH RTN

channel will display. Each time you press O , the TV will switch back and forth between the last two

channels that were tuned.

Note: if you press C_TN from a non-antenna input, the TV will return to the last-viewed input.

Switchingbetween two channels usingSurfLockTM

The	SurfLock		TM	feature		temporarily		"memorizes"			one
channel			OH FITN				you can return			to	that
		to the		O	button, so
channel quickly from any other channel by pressing
OH RTN				.	achannel		to the	OH RTN
O	• To memorize							O	button:
1	Tune	the	TV	to	the	channel	you	want	to	program

•OH RTN

mtothe © button.

CH RTN .

Press and hold O for about 2 seconds until

the message "Memorized" appears on-screen.

CH FITN

The channel has been programmed to the O button.

3 You can then change channels repeatedly, and

CH RTN

when you press O , the memorized channel will be tuned.

The TV will return to the memorized channel one

OH RTN

time only. Once you press O and then change

channels again, the CH RTN memory will be cleared

and the button will function as Channel Return,

by switching back and forth between the last two

channels that are tuned.This feature also works for external inputs.

SelecUng the picture size

You can view many program formats in a varie b, of

picture sizes--Natural, TheaterWide 1, TheaterWide

2,TheaterWide3, Full,4:3ItB, Native,and Dot by Dot

(available in PC Mode Only).

Note: The "picture size" illustrations are examples only. The format of the image (in any of the picture sizes) will vary depending on the format of the signal you are currently watching. Select the picture size that displays the current program the way that looks best to you.

You can save separate picture size preferences for each input on your TV.

To select the picture size using the remote

control:

PlC SiZE

1 Press © on the remote control.

2 While the Picture Size screen is open, you can do

one of the following to select the desired picture size:

PiG SIZE

• Repeatedly press O

• Press the corresponding Number button (0-6) while the Picture Size screen is open.

•Press A or Y while the Picture Size screen is open.

(comin ued)

39

40_46 55G300U EN-ASindb 89 2010/3/16 _@ 05:48:56