After the time zone has been set, you will be asked to
set the current Daylight Saving Time status.
To set the Daylight Saving Time status:
1 Press 4 or _ to select Yes orNo, highlight [}one,
and then press @.
Viewingthe system status
To view the system status:
MENU
IPress O and open the Setupmenu.
2 Highlight Installati0nand press @.
3A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Inf0rmati0., and press @.
4. Press 41_ to scroll through the menu bar toselect

theFactory[}efaultsorSupportinformationand

view the related information.
To close the screen and return to the
Installation menu:
Highlight [}oue and press @_.
To return to normal viewing:
EXiT
Press O.

ResetFactory Defaults

To reset all settings and channels to their
factory default values:
MENU
IPress © and open the Setupmenu.
Highlight Installationand press @. A new set of
Installation menu icons will appear.
3Open the System Status menu, highlight System
Information,and press @.
4. Press ,_t_ to scroll through the menu bar toselect
Factory[}efaults.
5Highlight Yesand press @.
6 (If PIN cc×tehas been set, enter your PIN code. Press
4 or _ toselect [}oRe and press @.) A warning
message will appeal: select Yes and press @, the TV
will turn offautomatically after afew seconds. After
the TV turns off, unplug the TV power coM and then
plug itin again tocomplete the reset process.
To cancel the reset:
Select No and press@ in step5 above.
34
40_46 55G300U EN-A5indb 84 2010/3/16 T£-05:48:4?