AeroGarden PRO 2Remove Pump and Clean Pump Tower, AUnplug your AeroGarden BRemove Bowl from Base

2Remove Pump and Clean Pump Tower

Follow the steps whether your are cleaning a Pump from a planted AeroGarden or an empty AeroGarden.

AUnplug your AeroGarden.

BRemove Bowl from Base.

CRemove Grow Surface from Bowl and bring to sink or set on towel. Hint: Lift the View Door and slide one hand into the Bowl to lift.

DRemove Filter from the back of the Pump Tower and rinse under hot water or discard if you have a new Filter.

(Missing or torn Filter? See Troubleshooting on Page 7.)

Grow Surface

Filter

Cover Plate

E Turn Grow Surface upside down and remove Cover Plate.
1	Insert flat-head screwdriver at an angle into rectangular
	slot on right side of Pump Tower and gently push down
	on screwdriver.
2	Repeat step “1” on rectangular slot on left side		1
	of Pump Tower.	2
	Pump

F Remove the Pump by inserting the flat-head screwdriver into the space under the Pump. Push down on the handle of the screwdriver to lift the Pump out of the Pump Tower.

GPull Pump Wire from Wire Slot but keep it attached to Grow Surface.

HRinse out any residue or roots from Pump and Pump Tower in sink. It is okay to get everything (the Pump, Pump Wire and Grow Surface) wet.

Page 3