IBM ATM OC-3c manual Logging Off, Automatic Logout, User Name Default Access Level Password

7-4CHAPTER 7: ACCESSING MANAGEMENT FEATURES

Table 7-1Default Users

User Name	Default	Access Level
	Password
monitor	monitor	monitor — this user can view, but
		not change settings on the screens
		they can access.
manager	manager	manager — this user can view and
		change the operational parameters
		(but not the special/security
		features) on the screens they can
		access.
security	security	security — this user can view and
		change all manageable parameters
		on the screens they can access.
admin	(no password)	security — this user can view and
		change all manageable parameters
		on the screens they can access.

To find out which ATM screens can be accessed for each of the security levels, refer to Appendix B, “Screen Access Rights”.

For access rights to Switch screens, see the user guide that accompanies your Switch.

When you have logged on, the Main Menu screen is displayed, as shown in Figure 7-4.

Logging Off

When you have finished using the facility, select the LOGOFF option from the bottom of the Main Menu. If you accessed the facility using a Telnet session or modem, the connection will be closed automatically.

Figure 7-4 Main Screen

Automatic Logout

There is a built-in security timeout on the VT100 interface. If you do not press any keys for three minutes, a message warns you that the inactivity timer is about to expire. If you do not press a key within 10 seconds, the timer will expire and the screen will be locked; any displayed statistics will continue to be updated. When you next press any key, the display changes to the Auto Logout screen.

The Auto Logout screen asks you to enter your password again. If the password is correctly entered, the screen that was active when the timer expired is re-displayed. If you make a mistake entering your password, you are returned to the Logon screen.