Problem solving guide
A check or fault indicator light comes on but the wash programme continues as normal.
Problem | Cause and remedy |
The Hygiene info check | A programme using a temperature above 60°C has |
indicator light comes | not been run for a long time. |
on. | In order to prevent bacteria and unpleasant |
| odours building up in the machine, run the Cot‐ |
| tons 90°C using powder detergent. |
|
|
The Check dosage | Excessive foam has built up during washing. |
check indicator light | Use less detergent next time, and follow the man‐ |
comes on. | ufacturer's recommended dosage amounts on the |
| packaging. |
|
|
The Main wash or Rin‐ | The washing machine has detected a fault during the |
ses indicator lights | wash programme. |
flash in the programme | Start the programme again. If the fault indicator |
sequence display and a | comes on again, call the Miele Service Depart‐ |
fault number appears in | ment. |
the display. |
|
|
|
The | The programme selector was moved to another posi‐ |
indicator light flashes in | tion after the programme had started. |
the programme se‐ | Turn the programme selector back to the original |
quence display. | position. |
|
|
To switch off the fault indicator: Switch the washing machine off with the button and turn the programme selector to Finish.
The check indicator lights come on at the end of a programme and when the washing machine is switched on.
42
