Spinning

Final spin speed

Programme

rpm

 

 

Cottons

1400

Minimum iron

1200

 

 

Automatic plus

1200

Dark garments / Denim

1200

 

 

Express 20

1400

Shirts

600

 

 

Woollens 

1200

Delicates

600

 

 

Drain / Spin

1400

Separate rinse / Starch

1400

 

 

You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above.

Tip: For programmes with a maximum spin speed not shown on the control panel, the nearest spin speed above it will light up. However, to protect the laundry the machine will only spin at the spin speed quoted in the chart.

Rinse and interim spin

There is a spin after the main wash and between the rinses. A reduction in the final spin speed will also reduce the interim spin speed. If a spin speed of less than 700 rpm is selected for the Cottons programme, an additional rinse is introduced.

To omit the final spin (Rinse hold)

Press the Spin button until the  (Rinse hold) indicator light comes on. The laundry will not be spun and will remain suspended in the final rinse water. This reduces creasing if the laundry is not going to be removed immediately after the end of the programme.

To start the final spin:

Use the Spin button to select the spin speed you want. The machine will begin the final spin.

Press the Door button. the water will drain away. Press the Door button again to open the door.

To omit rinse and interim spin and the final spin

Press the Spin button repeatedly until the  light comes on.

After the last rinse, the water will be pumped away and the anti-crease phase will switch in. In some programmes an additional rinse is introduced with this setting.

24

Page 24
Image 24
Miele 09 900 700 Spinning, Final spin speed, Rinse and interim spin, To omit the final spin Rinse hold