Problem solving guide
The wash programme stops and a fault indicator light comes on.
Problem | Cause and remedy |
The Check drainage | The water outlet is blocked. |
fault indicator light | Clean the drain filter and the drain pump as de‐ |
flashes and a fault num‐ | scribed in "Problem solving guide – Opening the |
ber appears in the dis‐ | drum door in the event of a blocked water outlet |
play. | and/or a power failure". |
|
|
| The drain hose has been fixed too high. |
| The maximum delivery head is 1 m. |
The Check inlet fault in‐ | The water inlet is blocked. |
dicator light flashes and | Open the stopcock. |
a fault number appears |
|
The filter in the water inlet hose is dirty. | |
in the display. | Clean the filter. |
| |
The Check inlet and | The water protection system has reacted. |
Check drainage fault in‐ | Close the stopcock. |
dicator lights flash and | Call the Miele Service Department. |
a fault number appears |
|
in the display. |
|
|
|
The | There is a fault. |
Rinses flash and a fault | Start the programme again. If the fault indicator |
number appears in the | comes on again, call the Miele Service Depart‐ |
display. | ment. |
|
|
To switch off the fault indicator: Switch the washing machine off with the button and turn the programme selector to Finish.
41
