Error information
Error information
Error messages | Cause and corresponding | |
|
| |
| Error when the communication is executed. The parameter setting (host | |
Set up the parameter. | name, capture port) has not been set. | |
| ➔ Check parameter setting (+p.88) | |
|
| |
It has not been registered to PJ as | Error when Start Communication or Start real time capture is executed. The | |
IP address of the computer has not been registered. | ||
a group. | ||
➔ Register the IP address by using the web browser (+p.95) | ||
| ||
|
| |
Cannot be displayed as PJ is under | Error when Start Communication or Start real time capture is executed. The | |
other capture, viewer or advanced card imager function is now operating. | ||
display. | ||
➔ Wait until the communication function is available. | ||
| ||
|
| |
| Cannot establish the connection with the projector when the Start com- | |
Cannot connect to PJ. | munication is executed, Terminate Communication, Capture transfer, Start | |
real time capture or End real time capture. | ||
| ||
| ➔ Check connection of the network cable. | |
|
| |
| Cannot transfer the data to the projector when the Start Communication, | |
Cannot transfer data to PJ. | Terminate Communication, Capture transfer, Start real time capture or End | |
real time capture is executed. The | ||
| ||
| ➔ Check the connection of the network cable. | |
|
| |
| Cannot receive the data from the projector when the Start Communica- | |
Cannot receive data from PJ. | tion, Terminate Communication, Capture transfer, Start real time capture or | |
End real time capture is executed. The | ||
| ||
| ➔ Check the connection of the network cable. | |
|
| |
Other PC has authority. Cannot | When executing the Terminate Communication, you cannot quit the com- | |
complete "Network Communica- | ||
munication because other computer has an authority | ||
tion". | ||
| ||
|
| |
Other PC has authority. Cannot | Other computer has an authority. | |
obtain authority. | ||
| ||
|
| |
Invalid port number | When the parameter is set, the reserved port number is specified. | |
➔ Check the parameter setting (+p.88) | ||
| ||
|
| |
PJ has not started Network Com- | The projector might have turned off during the communication. | |
munication. Close the window and | ||
➔ Check the projector power and | ||
open it again. | ||
| ||
|
|
107