Eiki QXXAVC922---P owner manual Configuring security with the projector

Chapter 5 Wireless LAN configurations

Configuring security with the projector

Configure security with the projector by following the steps below.

After configuring the network in “5. Wireless LAN Configurations” (p.33-42), select “Next” in the LAN setting screen and press SELECT button. The security configuration screen appears. Refer to “6. Basic setting and operation” ➔“Configuring wireless LAN setting and security setting” (p.53) as well.

WEP configuration screen

Use the Point ed buttons to select the security type. To disable the security, select “Disable.”

Use the Point 7 8 buttons to move among the items; use the Point ed buttons to adjust settings.

This projector provides the following security options. Use optimum security option on your network environment.

WEP64(40)bit Open

WEP64(40)bit Share

WEP128(104)bit Open

WEP128(104)bit Share WPA-PSK(TKIP) WPA2-PSK(AES)

36

Notes when entering characters:

The “¥” symbol is displayed as “\” when the ASCII key is used. The “]” symbol is treated as a character by the ASCII key, but it is not interpreted as a character by the HEX key. In HEX, the “]” symbol is displayed in red and setting is denied.

You can not set all the characters with the “]” symbol. This will be considered as no operation.

ASCII key characters : Space - 0 to 9 A to Z a to z ! " # $ % & ' ( ) * + , . / : ; < = > ? @ [ ¥ ] ^ _ ` { } ~

HEX key characters : 0 to 9 a to f