Panasonic KX-TDA100 installation manual Error Code, Error Message, Probable Cause, Solution

				4.1 Troubleshooting
Error Code	Error Message		PROBABLE CAUSE	SOLUTION
041*	Expansion Memory	•	MEC card is not properly	• See if the corresponding optional
	Card Failure		connected	service card is installed properly
				• Pull out and re-insert the
				corresponding optional service card
				• Replace the corresponding optional
				service card
090	Over Card Limitation	•	Too many optional service	• Reduce the number of optional service
			cards installed	cards
091*	PT connection over	•	Too many PTs connected	• Reduce the number of PTs
092*	CS connection over	•	Too many CSs connected	• Reduce the number of CSs
200	LPR start up error	•	Optional service card	• Pull out and re-insert the
	(ROM NG)		malfunction: DHLC, DLC,	corresponding optional service card
			CSIF, T1, E1, BRI, PRI,	• Press the Reset Button
201*	LPR start up error
			OPB3, CTI-LINK, E&M,
				• Replace the corresponding optional
	(RAM NG)
			IP-GW, DID, SLC8, IP-
				service card
			EXT, LCOT
202*	LPR start up error	•	Optional service card	• Pull out and re-insert the
	(No Program)		malfunction: DHLC, DLC,	corresponding optional service card
			CSIF, T1, E1, BRI, PRI,	• Press the Reset Button
203*	LPR start up error
			OPB3, CTI-LINK, E&M,	• Update the software of the
	(Version NG)
			IP-GW, DID, SLC8, IP-
				corresponding optional service card
204*	LPR start up error		EXT, LCOT
				• Replace the corresponding optional
	(Download NG)
				service card
205*	LPR start up error
	(No response)
206	LPR start up error
	(Card type NG)
207	LPR start up error
	(Check SUM NG)
230*	Card disconnected	•	Optional service card not	• See if the corresponding optional
			installed properly	service card is installed properly
		•	Optional service card	• Pull out and re-insert the
			malfunction	corresponding optional service card
		•	Back board malfunction	• Press the Reset Button
				• Replace the corresponding optional
				service card
				• Replace the back board (be sure to
				turn off the Hybrid IP-PBX when
				replacing)

Installation Manual 233