Panasonic installation manual Equipment, Distance, KX-TDA100BX/KX-TDA200BX, Installation Manual

2.8 Connection of DECT Portable Stations

*2 KX-TDA100BX/KX-TDA200BX: 8

CAUTION

•The CS should be kept free of dust, moisture, high temperature (more than 40 ˚C), low temperature (less than 0 ˚C), and vibration, and should not be exposed to direct sunlight.

•The CS should not be placed outdoors (use indoors).

•The CS should not be placed near high-voltage equipment.

•The CS should not be placed on a metal object.

•Do not use this wireless system near another high-power cordless system such as DECT or SS wireless.

•Maintain the distances listed below between equipment in order to prevent noise, interference or the disconnection of a conversation. (The distance may vary depending on the environment.)

Equipment	Distance
CS and office equipment such as a computer, telex, fax	More than 2 m
machine, etc., or microwaves
CS and PS	More than 1 m
Each PS	More than 0.5 m
Hybrid IP-PBX and CS	More than 2 m

Too many CSs in a small area can cause problems due to conflicts over which signal channels each CS can use. Ideally, CSs should be a minimum of 25 m to 40 m apart.

However, the required distance between CSs may vary depending on the environment of the installation site and conditions in which the wireless system is used. Conduct the site survey to determine the appropriate distance.

146 Installation Manual