Panasonic KX-TDA100 Connection of 2.4 GHz Portable Stations, Overview, CSIF4 KX-TDA0143, Distance

2.9 Connection of 2.4 GHz Portable Stations

2.9Connection of 2.4 GHz Portable Stations

2.9.1Overview

The following equipment is required to connect the wireless system:

CS: Cell Station (KX-TDA0142/KX-TDA0141)

KX-TDA0142 Using a CSIF Card

This unit determines the area covered by the wireless system. Up to 3 calls can be made at the same time through each CS.

•CSIF4 (KX-TDA0143)

One CSIF4 card supports up to 4 Cell Stations.

•CSIF8 (KX-TDA0144)

One CSIF8 card supports up to 8 Cell Stations.

KX-TDA0141 Using a DHLC/DLC Card

This unit determines the area covered by the wireless system. Up to 2 calls can be made at the same time through each CS.

PS: 2.4 GHz Portable Station (KX-TD7680/KX-TD7690)

The KX-TDA100 and KX-TDA200 can support up to 128 PSs. For more details about the PS, refer to the PS Operating Instructions.

CAUTION

•The CS should be kept free of dust, moisture, high temperature (more than 40 ˚C), low temperature (less than 0 ˚C), and vibration, and should not be exposed to direct sunlight.

•The CS should not be placed outdoors (use indoors).

•The CS should not be placed near high-voltage equipment.

•The CS should not be placed on a metal object.

•Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the KX- TDA wireless system. Examples of such systems are cordless telephones, wireless LAN, Home RF, microwave ovens and other ISM devices. These systems may cause minor noise.

•Keeping some distance between the equipment listed below may prevent interference. (The distance may vary depending on the environment.)

Equipment	Distance
CS and office equipment such as a computer, telex, fax	More than 2 m
machine, etc.
CS and PS	More than 1 m
Each PS	More than 0.5 m
Hybrid IP-PBX and CS	More than 2 m
CS and CS	More than 15 m

Installation Manual 173